I need a copy of the user's manual/ safety instructions

copy and paste

https://www.jackssmallengines.com/jacks-parts-lookup/manufacturer/milwaukee/electric-drill/0235-1-serial-755-70423-milwaukee-electric-drill-driver-parts/1-2-keyless-chuck-magnum-drill

https://documents.milwaukeetool.com/58-14-2792d1.pdf



https://documents.milwaukeetool.com/58-14-2792d1.pdf

Free manual at the link shown.

Please look at this site:

http://www.ebay.com/itm/DELTA-MILWAUKEE-14-Drill-Press-DP-220-Instructions-Parts-Manual-0239-/310388408599

This site has pictures that might help:
http://www.ebay.com/sch/sis.html?_kw=Vintage+Delta+14%22+Drill+Press+DP220+%22Triple+Duty%22+Bench+Model+Tilt+Table

Magnetic drills have a safety system built into them so the motor will not run unless the magnet is on and the tool is sitting on between at least 1/8-inch and 1/4-inch steel. If your drill is sitting on enough steel you may have a problem with the sensor system inside the drill. Those problems are usually electronic parts related and, most of the time, they are R&R (Remove & Replace) method is used until you fix the problem.

go to milwaukeetools.com and you can download the manual.

I am assuming that you have this tool on some steel. If so and the unit will not turn on I would think that the panel is bad. You can find the breakdown and wiring instructions for this tool by going to milwaukeetool.com and typing in your separate model number but you will need the serial number also.

go to"milwaukeetool.com and type in your model number, you will also need the serial number to locate the information you requested. You might need to separate the tools and use the base and motor separately but it is there.

You can get everything you need at the following site (be sure to scroll down for the manuals):
http://www.milwaukeetool.com/PartsAndService/DownloadManuals/All.aspx?ProductId=6480%2020

here is a site where you can see the schematics and buy the parts I hope it works for you:
http://www.toolpartsdirect.com/milwaukee/milwaukee-7.html

if it does, don't forget to rate me
thx

if this is a Milwaukee drill, go t Milwaukeetools.com and type in the model number and you can download an instruction/owners manual. If not give me the brand and I will try and find one for you.