Whirlpool Super Capacity 465 Oven/Stove

Super Capacity 465 oven fix with service manual link

I hope this helps.

My Whirlpool Super Capacity 465 oven

Just unscrew the glass cover and change out the bulb.

there are 3 screws under the front of the top with the oven door open actually there are 6 screws but only 3 you need to remove to raise the glass top up!! to service the burners

whirlpool super capacity 465 accubake system gas stove with auto starter - oven worked fine the previous night the next day will not do any thing any help out there?

You are looking at approx. $450.

Get a tech to do this. You will end up breaking the replacement glass if you are not careful. It is too hard to explain to replace the glass by not seeing what you are doing.

Same thing happened to me about 1 month ago... Did you get some kind of power outage or lightning strike??? I am pretty sure the stove part works but the oven doesn't right?!?! It might be 2 things.. Either the temperature sensor inside the oven doesn't work or it's the control board (where the clock is). I tried to chaned teh temp sensor but it did not work. I then changed the Control Board and oven works again...

I had the same FSE error which the whirpool web site advises that you will need to schedule a service appt to fix. Instead I leaded against the door while initiating the cleaning cycle and the door locks and oven cleans fine.

Press and hold the Broil button for 5 seconds. You will see the c change to f. THen change the temp to what you need.