Washer wont spin on normal or heavy loads but it will spin on knit loads? It spins counter clockwise on knit loads but doesnt spin clockwise on normal or heavy loads.
drain pump assembly was clogged - but all suggestions on page had me look at all options to troubleshoot. Thanks you saved me money 115.00 plus taxes and whatnot. Thanks!drain pump assembly was clogged - but all suggestions on page had me look at all options to troubleshoot. Thanks you saved me money 115.00 plus taxes and whatnot. Thanks!
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Your washer has a lid switch. If the switch is broken the washer will not spin. The pump is mounted on the motor. In the wash cycle the pumps turns counterclockwise. In the spin cycle the pump turns clockwise, forcing the water out of the machine. So if that lidswitch is dead then she won't pump OR spin. This video shows how to get into your machine and the next one shows how to replace the lid switch Use this GUIDE to help you
Tip machine back and remove the bottom panel, 3 screws. You will then see a large tube at the front, unscrew in a counter clockwise direction, and remove. Clean pin trap lubricate o ring and replace back into recepticle
If your agitator is a 2 piece, it has a rachet action and turns free counter clockwise and locks to the bottom piece when turning counter clockwise.
The transmission disengages the agitator when it is in the spin mode. If you put the washer in the spin cycle the agitator should free up.
If the washer is spining ok and the agitator is not turning free you have a transmission problem.
fault may be tacho on motor fallen off or round magnet that turns inside the tacho coil has become unscrewed. remove motor and check tacho. it is located at opposite end to the belt pulley
My Frigidaire front loader washer model LTF2140E doesnt want to drain the water when set to wash (heavy-normal-quick selectors). It washes put thats it. I have to switch the selector to drain/spin then rinse/spin cycle to finish the load. I checked the drain hose for any clogs....everything is clear. Any suggestions? Also,iIs their any reset buttons for this type of washer?
did you happen to solve the problem? I am having the same exact issue
with mine...washes fine, but won't do the spin cycle. it spins counter
clockwise really slow at first, presumably to balance the clothes, and
then starts to spin up clockwise (to do the spin cycle) but then
whinnies and then stops....!
×