At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Hi
I've got a fully integrated inglis dishwasher ...but the wooden front door has just fallen off!!!
It has 4 clips attached to the door, and 4 holes on the dishwasher... but the gaps don't fit the clips...
Help?!
thanks
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Maria, adding the door to the front of machine has increased over all thickness to what was existing, washer was not designed for the extra thickness and will catch on lower part of washer.
You may have a few choices, shorten added door panel, taper bottom of panel to allow operation, or remove added panel.
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
The finished look ref need space in back 4 in. for proper air
if front is blocked same problem with builders here never make room for fancy stuff to work right
Sounds like door seal. The rubber seal ends at the bottom of both sides. examine the ends to see if they look the same. some have a plastic insert. it may fallen out. cheap part to order.
typically there is a metal trim around the wooden front. on the sides of the dishwasher door you will see some small screws. remove those screws and the wooden panel can be easily removed.
this may work - if it is an integrated dishwasher you should have a star shaped screw attaching the door to the machine on either side (about half way down). try pulling the machine out - and then looking for the holes on either side at the front. insert a star screw driver (may not work with other screwdrivers) and release the bolts (screws) then slide the door upwards.
I have an SGV53E23 so don't know if this will help. My door is screwed but also held in place by 2 double sided sticky pads about half way down. They stick like the proverbial so try easing the door off one side at a time and look down to see if you can see any sticky pads. If so firm but gentle easing will get the baby off.
×