Kenmore 24032\24036 Top Load Washer Logo

Related Topics:

Posted on Mar 03, 2008
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Broken Washer The washer will drain, however it won't spin. It makes a grinding noise when the switch is set on spin. The washer is only 4 years old. Please help!!!! Thank you

Answer This Question
  • 6 more comments 
  • Cant Fix Mar 04, 2008

    Thank you for responding. It appears the washer will not agitate either. I turned the washer on the side and viewed the motor while my wife attempted to engage the the spin cycle. The small post at the end of the motor will only move slightly while there is a lound grinding or clicking noise apparently coming from the motor.

  • Cant Fix Mar 04, 2008

    Thank you so much. The washer is a Kenmore Elite, model #110. 22932100, SN# CL 4137690.

  • Cant Fix Mar 04, 2008

    [email protected] Thank you

  • Cant Fix Mar 04, 2008

    Got it. Thanks again. I'll let you know if I am able to fix it

  • jnicholegc Mar 04, 2008

    how to change washer coupling..

  • Anonymous Mar 09, 2008

    drive coupler broken

  • valkaz Jul 09, 2008

    I have the same issue with a similar machine:

    Kenmore 80 Series, Type 111

    Mod: 110 24862300

    SN: CP 5145884



    Since I am a driven single mom, I want to save some money and fix this myself. Is it difficult? Do I need the same part number? Can you send the repair instructions to me also?

    email: [email protected]



    Thanks!

  • Kody Lawrence
    Kody Lawrence Nov 06, 2014

    I have had a similar issue with my washer. I was a newer dryer too so I didn't have the money to just go buy a new one. I had a repair service come out and take care of it for me. http://www.a1applianceky.com/services

×

1 Answer

Anonymous

Level 3:

An expert who has achieved level 3 by getting 1000 points
All-Star:

An expert that got 10 achievements.
MVP:

An expert that got 5 achievements.
Vice President:

An expert whose answer got voted for 100 times.

  • Master 770 Answers
  • Posted on Mar 04, 2008
Anonymous
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points
All-Star:

An expert that got 10 achievements.
MVP:

An expert that got 5 achievements.
Vice President:

An expert whose answer got voted for 100 times.

Joined: Dec 03, 2007
Answers
770
Questions
1
Helped
474852
Points
1794

Sounds like you have a broken drive coupling....will the unit agitate ok??

  • 1 more comment 
  • Anonymous Mar 04, 2008

    your drive coupling is broken you need to get Whirlpool part number 285753 you can change this yourself.. post you email plz i will send you the procudure

  • Anonymous Mar 04, 2008

    what is your email i will send you a step by step to fix it

  • Anonymous Mar 04, 2008

    check your email

×

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Washer fills but won't agitate. Will fill and not spin. Has a loud grinding noise. Less than 3 years old
What you have is a broken drive coupler

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

Read full answer
Sep 11, 2011 • Admiral AW22 Top Load Washer
10helpful
5answers

Maytag washer makes loud grinding noise during the spin cycle
if it's making a noise then either your drain pump bearing is going out or your thrust bearing is going out (assuming the noise happens in both spin and wash). Tip the washer backwards so that you can get underneath of it. Take the belt off and spin the pump pulley on the right side. This should spin effortlessly.

The middle pulley is the trustbearing pulley. Spin this--- one direction it should have a little bit of resistance--- the other should have more resistance
Read full answer
Aug 20, 2009 • Maytag Atlantis MAV6000 Top Load Washer
1helpful
1answer

Won't spin, makes clunking noise, drains fine
If it agitates fine , with normal noise , drains with lid closed , then the problem is probably the transmission .
Read full answer
Aug 02, 2009 • Kenmore 24032\24036 Top Load Washer
1helpful
1answer

Washer is loud, and won't spin or agitate
check the motor bushes,and also check for bearings in drum you can check this by lifting the inner drum up and down if you feel a knocking noise then this will be the bearings have worn.
Read full answer
Jul 13, 2009 • Frigidaire ATF6000ES Front Load Washer
0helpful
1answer

WHDRR418G1WW WASHER WON'T AGITATE OR SPIN, NOT MAKING NOISES. FILLS AND DRAINS FINE.
sounds like you have a broken lid switch on the washer, maybe someone slammed the door or placed or stood on top of the washer, a broken lid switch won't allow washer to go into spin mode is a safety device so if is on spin cycle an someone sticks their hand it the machine stops an not breaks your hand.

broken lid swtich

good luck leave some feedback thanks!
Read full answer
May 28, 2009 • GE Washing Machines
0helpful
1answer

Grinding noise while agitating.
possible foreign substance under agitator
Read full answer
Feb 26, 2009 • Admiral AAV7000A
0helpful
2answers

Grinding noise,unit stopped, burning smell?
broken or slipping drive belt, motor to spin pulley defective drive clutch, spin brake fails to release to transmission is frozzen
Read full answer
Oct 07, 2008 • Admiral AW22 Top Load Washer
0helpful
1answer

Broken Washer
it could be the direct drive coupling that connects the motor to the transmission. fill it up with water and see if it will agitate, if it will NOT agitate then it is a good chance that this is the problem. 0404472.jpg
65edb02.jpg

worse case scenario is the transmission is bad, but this is unlikely.
Read full answer
Aug 04, 2008 • Kenmore 25862 Top Load Washer
0helpful
1answer

Kenmore 90 Series, washer Model 24924200
probably a sticky or broken bearing clutch, call a repairman. Probably be under 100k dollars to repair.
Read full answer
Jan 29, 2008 • Washing Machines
5helpful
1answer

Washer agitates, but makes horrible grinding noise. Spins okay.
thanks for posting problem solve :0)
Read full answer
Aug 26, 2007 • GE WVSR1060A Top Load Washer
Not finding what you are looking for?

View Most Popular

24032\24036 Top Load Washer

  • Washing Machines

Related Question

Washer fills but won't agitate. Will fill and not spin. Has a loud grinding noise. Less than 3 years old

  • Admiral AW22 Top Load Washer

Related Topics

395 views

Ask a Question

Usually answered in minutes!

Popular Questions

Kenmore Elite Oasis HE top load washing machine F1 code

Kenmore Oasis HE 27082 Top Load...

F1 error code on Kenmore Oasis He

Kenmore Oasis HE 27082 Top Load...

Kenmore washer stopped with F21 error code

Kenmore 46462 Front Load Washer

Water overflowing from drain pipe

Kenmore Elite 45986 Front Load...

Kenmore HE2t washer - error code 5d

Kenmore HE2 Plus Front Load Washer

Top Kenmore Washing Machines Experts

Alexander

Level 2 Expert

171 Answers

Cindy Wells

Level 3 Expert

6688 Answers

vince

Level 3 Expert

2530 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...