my jvc will come on for about a minute,then shut down and both led's blink rapidly together, just replaced the lamp about a week ago. which I bought from D-M.my jvc will come on for about a minute,then shut down and both led's blink rapidly together, just replaced the lamp about a week ago. which I bought from D-M.
AnonymousJul 04, 2008
I have a JVC HD-56G786 that will not turn on. The Power lighs, Blue and Red keep flasing.. It has done this before and all I had to do is turn it off and wait a few mins then turn it back on.. Now that does not work. I have even up-pluged the tv and left it un-pluged for 24 hours and that did not help.. Can someone please help me with this ?I have a JVC HD-56G786 that will not turn on. The Power lighs, Blue and Red keep flasing.. It has done this before and all I had to do is turn it off and wait a few mins then turn it back on.. Now that does not work. I have even up-pluged the tv and left it un-pluged for 24 hours and that did not help.. Can someone please help me with this ?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
some units require a lamp counter reset.the ballast usually starts at extreme output and at certain hour interval the ballast would start to decrease voltage as the bulb ages.to reset on some models can be reset using the remote
It normally means the lamp is in need of being replaced, and its all depending on the use of the TV as well as how long the lamp life is. You should be able to access the lamp via a small section near the rear or the back of the TV unit, if the lamp is blown or faulty it will look the same as a blown light globe.
To obtain a new lamp contact the brands authorised repair agent as they will be able to get trade prices and in turn, give you the best price,
Also make sure that whoever replaces the lamp resets the lamp use time as the TV will still not start if you don't reset the lamp use time as it will still think it has a faulty lamp. I hope this helps, good luck.
traction system warning message.The right turn signal also blinks
rapidly if turned on,both dashboard turn signal lights also on come together venture 2001.This happens when it is cold raining and the automatic head lights are on and the brake pedal is depressed.
The red light indicates the lamp is burned out. A new one is $100 to $200.
Depending on whether you use the old housing or want to order the lamp and housing together. There are lots of sources for this lamp online.
Once the lamp is replaced, it will be good as new and the lamp will last aprox. 8000 hours.
You need to replace the power supply board. The new ones have a bigger heat sink - obviously JVC knows about the problem because they made the new ones bigger. It cost $250 from JVC and I installed it myself - took about 3 hours to do. If you are not tech savvy call a repairman. Hope this helps.
Hi, How old is your TV? Lamps in DLP TV has specific working hours and physically lamp will look good but won't give light ( actually consume more current and protection circuit stops power supply) Thank you.
I would agree with you on that the power board could be at fault. The best course of action would be to get the board/TV checked out professionally. It could be the dry joints, resistors or capacitors.
A 5 blink code is a lamp power supply problem, but I would try a new lamp. I'd say about 90% of the time that fixes the problem.Get an ORIGINAL Sony lamp as the aftermarket replacements are ****. If you replace the lamp and still have the problem, you will need to have the lamp power supply/lamp ballast replaced
Refer to owners manual ! Blinking indicates the type of fault that is occuring on all your tv sets. example : power light on red - indicator light beside it green but blinks rapidly for half a second rapidly then shuts off. This refers to a faulty lamp or a lamp that is near its expiration. Read your manuals if indicators refer to easy repair sweet, but if it says call tech then bummer...
ican turn on but i cant hear nothing
my jvc will come on for about a minute,then shut down and both led's blink rapidly together, just replaced the lamp about a week ago. which I bought from D-M.
I have a JVC HD-56G786 that will not turn on. The Power lighs, Blue and Red keep flasing.. It has done this before and all I had to do is turn it off and wait a few mins then turn it back on.. Now that does not work. I have even up-pluged the tv and left it un-pluged for 24 hours and that did not help.. Can someone please help me with this ?
Where do you get a lamp?
×