Hello
I hope you can help, we have a LG RT-42PX10/H PLASMA TV I dont recall hearing any noise but we have all sound but no picture, could you possibly advise us on some fault finding prior to calling a service person. thanks
7,226 views
Usually answered in minutes!
I have a50 in Vizio plasma. I have had it 2 weeks and the screen is black but I can hear sound and change channels but screen is black.
SWISSTEC FLAT SCREEN TELEVISION SCREEN HAS GONE BLACK BUT CAN VAGUELY SEE THE PICTURE SOUND IS STILL ON
TV will not turn off and when you turn it on the screen goes black fuzzy then looks like its not on. But the power light stays on and you have to unplug it to turn it off.maxent mx-42vm11
same thing. I heard Pop and no picture, just sound. let's sue. just kidding, but someone tell us how to fix it , 2X4 included......
We have an LG RU-42PX10 42 inch Plasma. Now, the screen has hundreds of verticle color lines. The sound works fine and can change channels, but no picture. DVD and VHS do the same thing. What is the fix?
Hi Zjut,
I heard a loud POP (sounded like a capacitor has blown) then the picture was gone.
I measured and replaced the fuse on the YSUS board (others were fine) and now when I try to turn it on the orange standby light goes green for a second then it goes back to orange.
I had a very close look at the circuit boards, mainly around the YSUS board as it was the fuse on it that was blown.
There was no obvious signs (smell, brown spots or inflated (blown) capacitors) of burning damage.
Do you have any other suggestions?
Thank you
Song
watching the plasma lg-tv and a loud pop(sounmded like a firecracker)-no picture only soud- Do i check the fuses ?
heard a loud snap then lost picture on same TV and model
I have the same fault !!!
Screen blank but has sound
×