My crosley washer filled with water and stopped working. the water level light is blinking, but it won't finish the cycle. can you tell me what the problem is?

Question edited for clarity. 'field cycle' to fill cycle.

Do you hear water running? Water inlet valve failed.

or

Taking too long to fill. Check the strainers in the rear where the hose connects and check water flow from the hose.

Also try a power disconnect overnight to do a power reset of the control board.

=============================================
If the cold water supply is slow or not entering the tub at all, the washer will stop ahead of the rinse cycle while waiting for the tub to fill. This can be caused by a clogged water inlet valve, the main water supply valve being partially closed, or low water supply pressure from the home.

Crosley Washer stops mid cycle - Repair Clinic

https://www.google.com/search?q=Crosley+Professional+Washer+washer+stopping+at+beginning+of+fill+cycle

..

WHAT IS WRONG WITH YOUR WASHING MACHINE
http://www.repairclinic.com/0088_11_1.asp

possible stuck timer or showing the cycle hasnt finished

This indicates a faulty lid switch.

The switch the tube connects to shuts the water off. Will it cut off on high medium or low level. You can try blowing on the tube to see if it works. It should cut off when you blow.

I had the same problem too on one of my washers (not kenmore) it didn't complete cycle because someone turned off the hot water valve. soo i turned on the hot water and it worked fine. keep in mind that mine wasn't a kenmore. hope this helps some...