How do I clear machine error code E04-01 on a Panasonic DP-3030 photocopier? My photocopier is displaying this error and nothing is working.

http://errorcodepanasonic.blogspot.com/2011/07/error-codes-for-panasonic-copiers.html

http://www.panasonic.net/pcc/support/mfp/dp-3030/ps/download.html

I ran into the same problem with a client who had a Panasonic. Due to Panasonics withdrawl from the market, they junked the machine. I could find no valid cause for the error and did not have another ADF to put on it. If you can get into a diagnostics mode you may be able to test and find which sensor has failed.

Give me the specific details of your problem

click on the link below to download a suitable driver!

http://www.panasonic.net/pcc/support/mfp/dp-3030/index.html#02-1

Panasonic DP-3030 can be used with Windows 7 System. You need to download and install Windows 7 Drivers. Also, User's Manual & Driver's and installation can be download from the official support site. Windows 7 Drivers and all instructions are available here
Let me know if any further clarification/ assistance is required.

Hope it helps! Good Luck!
Don't forget to convey your feedback
CreativeTECH

its a machine counter error check for the connector or change counter unit

http://www.printcountry.com/drivers/panasonic_workio_dp_3030_driver_download.htm

Hello, this is the link to the driver download page.

http://www.panasonic.net/pcc/support/mfp/dp-3030/index.html#02-1

Thank you.

Hello, these machines needs to be connected to your network and correctly configured in order to scan. Once that is done you need to install a program called Panasonic Communications Utility which can be downloaded from www.panasonic.net. When the program is installed on your pc a blue tray will appear on your taskbar next to the time. Click on the tray and enter a name for the panasonic machine to identify you. Now go to the DP-3030 and press SCAN, scroll down with the arrow key until you see your name, set the document you want to scan and press START. A popup display should appear on your pc notifying you of the scan. If your name does not show switch the DP-3030 off and back on again and wait a minute or 2 for the machine to find your name.
Thank you.

Hi, I've found solution when you are trying to print to Panasonic, and showed at the screen pc data cannot complete, you need to remove the security code at the Panasonic. as soon as you remove the code, you can print from windows. good luck. Oki Latief