My Tromm washer will not spin on the rinse cycle. What should I do?
Will it spin after it washes if it does not then your belt might be broke
this model has no belt, most likely it's giving you an LE error code, and this means that the computer's sensor is checking to see if the motor is rotating. Either the sensor isn't working right or (20 $ part) 6501KW2002A there is something bigger going on. The part is usually tried first in order to fix it.
No belt on this model.
6501KW2002A is a sensor that goes out that the computer uses to check to see if the motor is turning. It is a 20 $ part that people try first.
×
1,361 views
Usually answered in minutes!
what does ie mean and how to fix it
Its easy, all u have to do is.. You know the long tube that lets all the dirty water out? yeah when it lets the water out, place ur palm on it so it cant let any water out, wait for a couple seconds (this should take 10 to 15 seconds) then the washer will start again :)
Rinse cycle is flashing but not emptying
can't change water temp settings on some cycles
×