I get error code 63 when i turn on my Fostex vf160

https://homerecording.com/bbs/threads/mr8-error.96678/

Don't know the code error but you can take it to your nearest parts store and they should be able to hook it up to there code scanner. They normally will do it for free. I would call them first to be sure they offer this test. Auto Zone will usually do it as well as Napa. I hope this helps.

I haven't personally used this equipment, but 9 times out 10, a hiss or noise problem is due to damaged or incorrect cables been used.
Check your cables.
Check your gear. If the inputs are TRS (1/4") the make sure your cables are to. This goes for any connection your recorder: balanced cables.
If the inputs are unbalanced, then you would use TS (1/4")

To burn an audio cd on the vf160 you can only do this under two conditions. One, you can only burn mixed down program material; and the other condition is saving program to disc through back up file where you must pre set the Clipboard IN/OUT parameters.

That code is not listed in the operators manual you might try removing the batteries and turning it off ror a few min. this will return everything to default settings or else you need a tech.

DickyO

First you can format the flashcard FAT-32 on your computer. If that does not help your card maybe broken or the brand is not supported. Than try to use another brand. Kingston and Transcend always make te best choice.

Hi,

This is due to the corrupted data in the card,
Please get your Card formatted by any external medium. It will work and yes, please take care to plug-in the devices to appropriate port, it can harm your instrument permanently.

Hope this helps.
Thanks.

serial key of nero 6

look like a system crash.
try to go into save mode and do a scandisk
if not, remove any newly install hardware or software.
restart the laptop.

I'm not finding that error code.

Does it come on 2 minutes after you plug it in?

If so, it may be a failing keypad or door switch / mount.

Of two minutes after you have been cooking?

That may indicate a bad humidity or other sensor.

Please give more detials so we can help further.