Need wiring diagram for GE frig, icemaker not working, solenoid not opening to allow water to icemaker
Icemaker must be at 28 degrees to make ice. The harness supplying the power should have 120 volts there at all times, and the icemaker itself is the device that switches the power off and on once all requirements are met. Your diagram for the fridge is on the rear service panel, or in a packet on the insisde rear..accordianman
17,469 views
Usually answered in minutes!
overload wiring
took the icemaker out of a GE fridge and installed into a Kitchenaid fridge freezer on top model 1995. the icemaker worked flawlessly in the GE fridge, so am confident the ice maker is not the problem. however, not so confident that the wiring has been properly connected.
The icemaker has; green, black, white and orange wires.
The Kitchenaid fridge has; green, black, white and tan wires.
Comon sense would tell me to connect the green-to green, black-to-black, white-to-white, and orange-to-tan, which is what I have done.
The water solenoid valve has a plug that connects to the valve with one connector being a dual tan wire, and the second connector containing a white wire.
When connected the water valve does not open to allow water passage.
Which wires are incorrectly connected?
thanks
Installed new ge ice maker in my fridge when it finally came to temp the water valve over filled the icemaker alot so i shut i shut off water supply and now it does nothing i tested all componets and the all work properly have continuity on the coil at the valve but not getting any power at the valve.
you will have 120vac at the Valve when it is calling for water from the Icemaker..
GE Refrigerator Model TFX25ZPBEWW Wiring Diagram
the condenser fan has 4 wires w,r,b&y the other side of the plug has 3 wires w,r,&r .the wires came out of the plug. I need to know how the wires match up from 1 side of the plug to the other.
×