I have a kfp750 food processor and was making breaddough yesterday, when the blade attachment suddenly rose up from its normal position. I shut the processor off, removed the dough, but cannot get the blade attachment off the shaft. Do you have any suggestions as to how to get it off? Thank you
Jennie Minda
Put the mixing bowl up as much as possible. spray some wd40 into the groove between the attachement and the motor shaft. Wait for several minutes, then with a hammer and a piece of wood, give the bowl a good wack. With a few goes, it will gradually come off. I will be putting some butter inside the attachement from now on to keep it lubricated
1,718 views
Usually answered in minutes!
blade will not come off of the shaft?
×