Came home from vacation went toconnect to router

D Link home wireless Routers don't really require any setup discs. Just connect the ISP modem to main port on router and the the pc to any other port. Done!

Wireless requires more setup, but is done via web admin.

The smart phone should work fine on any wireless router. Try going to wireless settings on the phone and if it has your network remember click and hold on your network and select forget network. This should clear out any thing cached about your network. Once that is done try re-connecting to your network and enter any password you may have.

remove the wireless profiles on the PC and see if that helps - [b]Wireless Profiles

• http://mgmcc.forumotion.net/networking-tutorials-f17/removing-an-existing-wireless-profile-t109.htm

- Vista/windows 7

• http://www.tp-link.com/support/showfaq.asp?id=214

- delete the wireless profiles Start control Panel classic view network and sharing center manage wireless networks
Delete the profiles you will then have to enter the wireless security key for any networks you connect to

The wireless settings in the Belkin has been setup with encryption.
You can restore the Belkin back to the factory default by powering up the Belkin and press the RESET button for 7 secs.
It is not wise to leave your wireless router unsecured, anyone can access your network and Internet connection and use up your allocated download limit. Once you exceed your download limit you could be slug with addition charges - this depends upon your contract with your ISP.
For details on securing your wireless router and configuring the wireless card in the laptop, please click on this link and follow my instructions :-
http://www.fixya.com/support/r3559128-wireless_router_security

Check under network connections and see which network is set to default You may be trying to sign on and connect to the wrong network.


Please rate my help++++ Thanks for using FIXYA

This message " A network connection is unplugged" comes when the connection unavailable may be due to faulty connection. Chek that your router is rightly plugged and the sockets are dust-free. If problem persists, contact support.

try checking the channel number of communication

check to see if the router has been enable on the broadcasting mode

do check if the router has been configured for WEP or WPA

check to see if the access is based on MAC address on the router

finally place the connection from the modem to the router in the ports numbered 1,2,3,4 instead of the INTERNET/WAN port and try connecting

Recreate your wlan network.
WLAN signal refers only to radio signal between Router and PC no link with your capability to pass-through: wrong password, access list or firewall can block your access with the strongest radio signal.
Check (or recreate ) your credential on your PC.
Check if you can log as admin into your Router.

This should be connected as so. From wall outlet to DSL modem, from DSL modem to D-Link router, From D-Link router to Laptop via wireless or wired connection. You will still need the DSL modem installed but the wire coming from the DSL modem will go to uplink port on the router instead of into the laptop.

I had a prob with connection, just call your supplier, mine was tiscali, and they will run through some programming details with you. was informed that sometimes changing passwords can effect it. mine has been fine ever since.