I just have gotten a new Bosch nexxt 300 series washer.. At times I have a problem with starting the machine..Is there a secret to starting, etc, door or what ever. Please advise.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Possible that there is no output to the motor from the control panel in which case the control panel is faulty or if you can check the voltage on the motor at the time of program start , then it can be confirmed on the motor failure, motor capacitor failure.Also check the spindle for free run in which case it which case it can be jammed.
bosch nexxt 300 series washing machine
This video will show you how to change the pump washing
machine
Please remember to subscribe to our YouTube channel for all appliance tutorials
a 4 THUMBS rating is appreciated for answering your FREE
question.
And don't forget to like us on
facebook
Try putting the washer on COLD and run "TWO" cycles. It must be on
COLD. There is a chance there is too much soap or fabric softener in
the washer. It may also help to clean the fabric softener tray where
you add the softener.
Bosch Nexxt 300 washing machine This video will show you how to change a door seal on this Bosch front loader washing machine and where to get the parts!
We had similliar problem. We were overloading the wash barrel and using too much soap. The soap was foaming causeing the washer to add rinse cycles hinse more time to the cycle. Make sure your soap has the HE ( high efficiency ) label on it. Hope this helps.
×