Question about Pulsar Chronograph Watch

1 Answer

The timer on Pulsar watch does not line up at 12 when reset.

The timer (stop watch) on my Pulsar Chronograph watch does not line up with the 12 when it is reset. I think it was knocked off center with very high magnatism. Is there a way I can manually reset it?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 13 Answers

To set the timer hand on these models of Pulsar watches, do the following: 
Looking at the face of the watch, there are two buttons and a crown on the right side. The TOP button is Button "A". - The BOTTOM button is Button "B".
There are 3 positions on the crown: IN (#1), FIRST CLICK (#2) & SECOND CLICK (#3).
First, pull the crown out to the second 'click' position (#3) ... This is all the way out. (STOP THERE! Pulling harder will harm your watch! Don't try to pull past position #3!)
Push and hold Button "A" for two (2) seconds. The dial will sweep around to the 12 O'clock position. You can advance the timer while the crown is in position #3 (second click out) to reset it back to the default position. 
The manual says that if you pull the crown out to position #3 while the timer is measuring, the hand will reset back to the 12 o'clock position... I haven't tried that, so I can't confirm.

Posted on Mar 31, 2010

  • Art Graham
    Art Graham Mar 04, 2016

    If you need to adjust the minute hand, press the button "B" as needed. When done, pressing and holding "A" will spin the second hand. Again, use button "B" to adjust. Pressing and holding "A" a third time spins the alarm hands. Press in the crown when done.

×

Ad

1 Suggested Answer

Anonymous

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Pulsar World Chronograph, World Timer


Click on the crown (the stem in the middle on the right side). There are three settings, and one of them will change the minute hands' behavior to normal. You might also check out this guide:

http://c01.coacdn.com/calibers/H800_condensed.pdf

May 07, 2014 | Pulsar Mens World Time Alarm Chronograph...

1 Answer

How do I reset the millisecond hand used in the stop watch function on my nixon Ride SS watch?


Try this:
Resetting Chronograph Hands:
Note: Some Nixon watches come equipped with a "screw-down" crown; the crown must be unscrewed by turning it counterclockwise before it can be pulled out)
1. Pull the crown all the way out to position 2.
2. Push the crown in slightly to position 1.
3. Push top pusher button to advance the second hand to line up with the 12:00 position
4. Push the crown back in. (Make sure it is screwed in if it is a screw crown)

Jan 02, 2014 | Watches

1 Answer

Chronograph not resetting to zero


pull crown out to first or second position press start till it goes to 12 then push crown back in,

Jan 18, 2013 | Breitling Bentley Motors 668 / A25362...

1 Answer

I just recieved my Movado 800 series watch today and the large chronograph timer hand won't reset to zero (top of dial @ 12 o'clock) when I press the zero button. It resets to 56 minute position....


you do not need to return, as this is re-settable. Pull out crown to the first position (date setting) and then toggle with upper push button. If upper button do not do the job, try the bottom one. When you reach 12, then push the crown back in. Start the chrono, stop it and check if it returns to 12.

May 18, 2011 | Movado® Series 800 Blue Chronograph Watch...

1 Answer

Cant set the second hand to move


The "second" hand on this watch is not actually a 'sweep' second hand, as on other watches.
This is a timer dial. ["Stopwatch 1/5 Second Hand"]
To start/stop this, use the top button (Button "A").
To reset this dial to 12 O'clock, use Button "B", after first stopping it with Button "A".
The "second" hand is the small dial at the 9 O'clock position.
In actuality, you 'could' start this and just not stop it...  Then it would function as a "large second hand". That would be up to the owner. (it might use more battery power though... ?)

Nov 11, 2009 | Pulsar Chronograph Watch

1 Answer

How to set alarm on Pulsar Chronograph 100M


See PDF here to solve this problem.
Wish Pulsar would have included this info with their watches!
http://www.pulsarwatches.com.au/manuals_pdf/121_1.pdf

Sep 23, 2009 | Pulsar Chronograph Watch

1 Answer

Reset timer after battery change in seiko sna285


If the stop watch hands are not in the "0" (12 o clock) Position, follow the prodedure below to set them to the 12 o Clock position

1, Pull the crown to secound position
2, Press Button "A" for 2 seconds.
3, Press Button "B" to Adjust the minute Hand to "0" Position
4, Press Button "A" for 2 secounds then press Button "B" to adjust secound hand to "0" Position
5, Press crown into normal position

From:

AmFix Jewelry & Watch Repair
203 N. LaSalle Street,
Chicago, IL 60601
Ph: 312 641 7000
Email: info@goamfix.com
Web: www.goamfix.com

Aug 28, 2009 | Watches

13 Answers

Chronograph hand not resetting to 12 o'clock


for my victorinox, the crown out one position and the reset button (lower chronograph button) changes the minute hand and the top (start/stop button) does the 10th's of a second...crown all the way out and top (start/stop button) does 30 second intervals for the minute counter.

Feb 23, 2007 | Kenneth Cole KC1232 Wrist Watch

Not finding what you are looking for?
Pulsar Chronograph Watch Logo

Related Topics:

2,309 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pulsar Watches Experts

Janelle Schoonover
Janelle Schoonover

Level 3 Expert

842 Answers

Ekse

Level 3 Expert

13434 Answers

Marvin
Marvin

Level 3 Expert

85223 Answers

Are you a Pulsar Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...