At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
All of the sudden my Canon MP11DX calculator quit printing on the tape. I have put in a new ink cartridge, but this was not the problem. What else is wrong? Why won't it print on the tape?
I have also tried replacing the ribbon, not the problem. It is already set to the "P" postion. I have also tried replacing the ribbon, not the problem. It is already set to the "P" postion.
How can I to change the ribbon ?How can I to change the ribbon ?
AnonymousMar 13, 2014
The printed numbers sit so far below on the tape that I have to grap the calculator closer to me or press the FEED button to see the numbers printed on the tape. Is there a solution to this problem, other than buying a new calculator?The printed numbers sit so far below on the tape that I have to grap the calculator closer to me or press the FEED button to see the numbers printed on the tape. Is there a solution to this problem, other than buying a new calculator?
AnonymousMar 13, 2014
The numbers that print on the tape is so far down that I have to pull the calculator closer to me or push and hold the FEED button to push the paper up so I can see what printed. Do you have a solution to this problem?The numbers that print on the tape is so far down that I have to pull the calculator closer to me or push and hold the FEED button to push the paper up so I can see what printed. Do you have a solution to this problem?
You can't post conmments that contain an email address.
I have the same problem every now and then. Reset on bottom of calculator, turn off the GT Rate, turn off the calculator turn back on. This always works for me!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
go to your browser search box type Instruction manual for Canon P27 -DH 12digit mini desk top printing calculator . on the page that appears you will see a PDF OF THE INSTRUCTION MANUAL. on the machine lift lid and the ink cartridge can be seen , you can lift the ink cartridge out and replace . Suggest download PDF just in chase .
Amazon.com, Inc.The keys (i.e., numbers) get stuck almost every time I use it. I have to actually wiggle the numbers so I can enter the next number. It's not the tape on the ribbon; ...
United States Open UniversityMay 3, 2012 - Early Years Ā· Working with Young People .... 11 Natural logarithms and powers of e on your calculator ... The figure shows the display on a calculator screen.... If your calculator is not in Math mode, repeat the steps of Activity 1. ... arrow keysto move between the boxes when inputting the mixed number.
The manual for the Canon P170-DH calculator is found on the canon usa web site. It is 22 mg in size, but prints out to 4 pages in English, Spanish and French.
According to the manual: Use only Ink Roller CP-13.
There are four figures showing the steps, so you'll have to imagine it.
1. Turn power switch off.
2. Remove the printer cover (Figure1).
3. Hold the tab of the ink roller. Lift the ink roller out of the base (Figure2).
4. Insert the new ink roller into position. Push down on the center of the ink roller until it locks into place (Figure3).
5. Replace the printer cover (Figure4).
Print out the manual for yourself and put it in a safe place.
The print cartridge may be installed wrong or there may be a problem with the tape installation, or a part broken on the printer.All these factors can cause no printing
i have inserted a new ribbon and it prints light
correct placement of ribbon
I have also tried replacing the ribbon, not the problem. It is already set to the "P" postion.
How can I to change the ribbon ?
The printed numbers sit so far below on the tape that I have to grap the calculator closer to me or press the FEED button to see the numbers printed on the tape. Is there a solution to this problem, other than buying a new calculator?
The numbers that print on the tape is so far down that I have to pull the calculator closer to me or push and hold the FEED button to push the paper up so I can see what printed. Do you have a solution to this problem?
×