2yr old daughter hit some buttons now it won't - pau 33 pau 33

You have a shorted printed circuit board inside the TV, careful testing and a repair manual are needed to find out which one is the issue.

Pau? as in end of life? seems that perhaps the control board is speaking in a foreign language? anything happen recently to make it this unhappy?

YOUR MAIN CONTROLLER IC (processor) is damaged you cant try ressiting it but I'm sure it wont work you need to get it professionally repaird by a qualified technician

I do not know what the pau means but check the vent tube. A dirty tube can cause the unit to think it is overheating and will shut down.

Did you check to see if the water outlet valves (that connect to the washer) are Good, Turned On and water comes out? Anyway you are not getting water into the machine either from that or you have 2 (Hot and Cold) water inlet valves are bad (very rare for both to fail). The fault code is usually "PU", not PAU!

If you need further help, reach me via phone at https://www.6ya.com/expert/steven_b77d19396bfe2249

PAU means the machine is "paused".

Reset the unit at the household circuit breaker and retry. PAU means the unit is paused either by a blockage and the sensor won't let the unit continue, or it was manually paused by a button press.

my name is joyce

first try the simple step, unplug unit for 60 secounds, then replug unit back up. reset load and see if that works. let me know if I can be of further assistance.

joyce

try this, press and hold eject button for around 15 seconds, this resets the cd drive, hope this helps