At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Cisco IP Phone 7940 and 3com nbx as 3rd party SIP phones
Cisco IP Phone 7940
Also the polycom Soundpoint IP 330.
Can these phones be used on the NBX as SIP phones
I was able to install the 3cx softphone with no issues.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Default Passwords: To get into the web interface, the default username/password is "Polycom"/"456" (Note that this does not work with Safari 1.2.2.) To get into the Admin interface on the hard phone, the password is "456". (Prior to v1.3.1, the web interfaces to the phone uses "Polycom"/"SpIp" as the username/password.) The "user password" (not used much) defaults to "123".
To reset a lost admin password to default: at phone boot, during the 5 second countdown, push/hold 468* on the phone. Enter the phone's MAC address as the password. This will reset network info but keep peers loaded. Tested on Soundpoint IP 650.
This means the phone cannot find its <mac>.cfg file on the boot server, and does not have one loaded in its own flash memory. You will need to configure a boot server to host the SIP software, BootROM, and all the config files (these are included in with the SIP software). You can download these from Polycom's product support page: http://www.polycom.com/support/voice/soundpoint_ip/soundpoint_ip330_320.html
This means the phone's SIP application has been erased. You will need to download the SIP app and BootROM from the Polycom support page, host the files on a boot server, and then point the phone to this server from the server menu so the phone will reboot and download the files.
Make sure you have the latest BootROM and SIP config files for this
polycom(sip.ld, sip.cfg, etc...) on your TFTP server. If you do not
have this - download from here - http://www.polycom.com/support/voice/soundpoint_ip/soundpoint_ip501.html
If you do not have a TFTP server, you can download one for free.
This means the phone's SIP application has been erased. You will need
to download the SIP app and BootROM from the Polycom support page, host
the files on a boot server, and then point the phone to this server
from the server menu so the phone will reboot and download the files.
×