I can't find the power adapter for my Gemmy Christmas Tree Lighted Trio set. Is there a replacement part I can order or purchase from a local retailer?

Question edited for clarity.

The link says it has a reset

https://www.google.com/search?q=gemmy+holiday+light+show+4+feet+christmas+tree+not+working+properly

..

https://gemmy.kb.help/

You might try contacting Gemmy for assistance.

contact gemmy website

http://www.gemmy.com/login.asp?message=Please+login+to+submit+or+view+tickets

or try ebay ?

I have a remote, and three trees, but no power transfomer. feel free to write me at [email protected]

I hope this helps. http://stores.holidayinflatablestore.com/-strse-1990/Lightshow-Wireless-Remote/Detail.bok

your site has the info

Here's what you do... This is for the trio christmas tree light show.
What you need.... small precision pointing tool.
On the largest tree base electrical box there is a push button. Press and release that button. A red led will flash indicating the box is in sync mode. turn the remote on and on the back of your remort, there is a small hole with the words reset over the top of it. Using the small precision pointing tool, press the recessed button and release. The remote will sync to the base unit. Walla!! Merry Christmas to all!!!

Press reset on the top of the main unit under the middle tree. The light will blink. While it's blinking, use a pin to press in the reset button on the back of the remote. The blinking light should go out, and you should be good to go. FWIW - I just looked for almost an hour before I found this answer today on-line. It worked for us.

Did you figure it out b/c I lost my remote and trying to figure out how to bypass the remote as well.