Canon MP830 Service Error 6000

Canon Printer Error Code 6000 is one of the typical errors that occur very frequently. It happens while users are attempting to print all of the printer's documents. The problem of Paper Jam is the main cause of this mistake.

Canon Printer Error Code 6000 refers to something in the printer that interferes with the movement of the carriage. In any case, I've been able to locate the problem: a piece of torn paper on the left side of the printer. Hard to get there However it's likely. The printer is running again! But often this is induced by a software error. Foreign objects, such as dust spores, pieces of paper, sticks, stickers, or other objects, block the proper opening of the paper feed tray. Due to the jam, the printer has an error of 6000.

Reasons for Canon printer error code 6000: The printer feed tray is wrongly fitted. A huge volume of documents next to the printer. The line feed is scratched or coated. Offer several print commands on paper at once. Faults in the sensor unit or in-line feed slit.

Our service: 24/7 support with the Printer expert team.

1. Turn off printer
2. Unplug all cords
3. Press ON button 5 times in a row
4. Plug printer back in
5. Try printing

If this doesn't work, call Canon
1(800)-ok-canon

The 6A00 is a Canon generic code for paper path jam. Verify the paper path, and clean it.

Hi cinlytan,

With the error that you're getting with your Canon mp258 , error number 6000 this means that your printer needs to be reset. You will need a software resetter for this specific printer. You may also use the software resetter for its many other errors. Kindly click on this link for the instruction and for you to be able to download the service tool. This should fix the error code that you're getting and other issues with your printer.

Hope it helps.

Thank you for using Fixya.

That is a line feed error (6000) It also should be flashing 3 times for this error on the on/off button.
This could be
1. Timing sensor unit QM2-2683
2. Timing **** disk film QC1-6229
3. Feed roller ***'y QL2-0925
4. Platten unit QM2-2923
5. Logic board ***'y QM2-3078
6. Paper feed motor QK1-1502

Error 6000 gets displayed when there is a paper jam or other general malfunction. When the message "6000 Printer error has occurred. Turn off the printer then back on again. If the problem persists, see the manual." Is displayed, something may block the paper feed tray from opening.
If the printer is surrounded with documents or when you copy large documents such as books, make sure that you secure the clear space in front of the tray before printing / copying. When the error message above is displayed and if you find something is in front of the tray, remove it. Then, turn OFF the printer and back ON again and the printer will be ready for printing.
If you still have the trouble, contact the repair service.

Check the printer for any paper jam or try to reset the printer to release memory code errors.

1. Press and hold the Resume button for 1 - 2 minutes.
2. Open the cover.
3. Remove the cartridge and then reinstall it.
4. Close the cover.
5. Turn Off the printer.
6. Turn On the printer.

I’m happy to help further over the phone at https://www.6ya.com/expert/jeremy_69f3cc28d95bf514

6000 is a paper jam or jammed sensor.

http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_series/pixma_mp600#ServiceAndSupport
Click service and support, then enter error 6000, then click Error LCD ... 6000..., then click Removing paper jams mp600. Sorry, but they use javascript so I can't give you a more direct link.

http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=SupportDetailTabAct&fcategoryid=257&modelid=10239

error 6c00Alarm / Power light flashes orange 11 times consecutively (Automatic Print Head Alignment Error) 2. Alarm / Power light flashes orange 2 times consecutively (Load Paper / Paper Feed Error) 3. Alarm / Power light flashes orange 3 times consecutively (Paper Jam Error / Cover Error) 4. Alarm / Power light flashes orange 4 times consecutively (Out of Ink Error) 5. Alarm / Power light flashes orange 5 times consecutively (Print Head Error) 6. Alarm / Power light flashes orange 6 times consecutively (Inner Cover Open Error) 7. Alarm / Power light flashes orange 8 times consecutively (Waste Ink Nearly Full Error) 8. Alarm / Power light flashes orange 9 times consecutively (Camera Connection Error)

Canon Printer Error Code 6000 is one of the typical errors that occur very frequently. It happens while users are attempting to print all of the printer's documents. The problem of Paper Jam is the main cause of this failure. There are several explanations why Canon Printer Error 6000 will happen when you work with a Canon printer. One of the factors is that one of the most simple common explanations is where the paper feed tray is blocked by certain dust particles and bits of paper. Another reason for this is that the paper feed tray is not adequately connected to the printer. If there is a tonne of a print order.

Reasons that cause Canon Printer Error Code 6000:

1. The feed tray of the printer is improperly fitted.
2. A large number of documents near the printer.
3. The line feed is scratched or smeared.
4. Giving multiple paper print commands at once.
5. Faults within the sensor unit or in-line feed slit.

Follow Blog: Canon printer error code 6000

Thanks for reading.

Canon site if the link does not work just go to canon.com -> support-> select Multifinction --> Inkjet --> Pixma MP830

Then type in - error code 5000 - (Leave off the " - "
Select #3 - ERROR LCD: Error code (5xxx through 9xxx) appears on the display -

1. Press ON/OFF switch to reset the multifunction device
2. Press Stop/Reset and ON/OFF to reset the printer
3. Removing paper jams MP800R / MP830 / MP530
4. The MP830 may require repair
5. Unlock the scanner lock switch (MP800R / MP830)

The links above detail each instruction. If they do not work here then got directly to the Canon Site.

Basically at one point there was a paper jam so clear it and then reset the machine.
Worked for me. Good luck to you :)