Bosch Maxx Maxx WFL 2260
Washing machine will not turn, fills and drains okay, drive belt intact, light grey deposit all over inside of machine clicking can be heard from control panel.
My drum stop, then I put in new carbon brushes. It works very good in 2mouth, now it stop again. Wht can be problem?
Hey check to see if you can move the drum by hand,, if you cant the the bearings on the drum have gone and it is seized ..
If you can turn it by hand then most likely it is the carbon brushes on the motor..
hope this helps
any questions dont hesitate to contact me im here to help....
SOURCE: Bosch Maxx WFL 2260
thanks sorry i have no hands on experence with bosch as im in usa and dont have many in my neck of the woods but there are bosch experts in here
2,306 views
Usually answered in minutes!
New set of brushes, cleaned out all the old deposits from the motor, running like a dream. Drive belt a bit awkward to get back on with limited access.
Hi
I have removed the drum on my Bosch WL2450 to replace the bearings but i cannot work out how to split it. It has numerous barbed teeth that all need disengaging at the same time.
any advice would be greatly received
×