Jvc av-27d304 no remote - how can I do a full reset? CC wont

Hi big john
To answer your question;
What you have is closed caption(CC) in text mode.
To remove it ;
On the original remote there is a button labeled CC
Hit that button until you see closed caption OFF
Hope this help Cheers

Looks like picture tube grid +dc supply. Check the resistors on the picture tube neck PCB.

iF YOU HAVE A MENU BUTTON ON THE TV YOU CAN GO INTO THE MENU AND TURN IT OFF.

Try unplugging your tv for a few hour/days to let it reset itself to default. Hope that helps.

hit the display button on your remote should turn it off

Remote control original is part # RM-C1200G-1H ...best to
have JVC original......$25.00......................T.

Roger, if your contrast (sometimes called picture) and brightness controls are at max you can increase the tubes brightness by turning the "screen control" clockwise, be advised a little turn goes a long ways, don`t crank it too far or you will get retrace lines, you will have to remove the back from the set and follow the red wire down from the tube to the "flyback transformer" on the front of the flyback are 2 controls, focus and screen, do not move the focus control, this should fix your problem.

Possible short in cable line = have you contacted your cable
provider and asked them to check it out ?? That's your next step................................T.

Please rate solution................................

I have the JVC I Art 46" TV. The Close Caption was turn on accidentally by my grandson. After lots of searching for the original remote. I called JVC Customer Support. He told me to change the Close Caption settings to CC2 and T1. That fixed the CC without having the original remote.