Model 110 stops with water in machine. Move dial to rinsing cycle. Runs some then stops with water in machine.

You can read about the possible issues that can cause this at the link below. SOLVED Why won my washer spin or drain Kenmore 110 Series Washing Machine

So when the cycle first starts, it will fill and agitate and spin. But then on the rinse cycle it stops?

That's an odd one. I would say timer, but if you already replaced that, then that leaves water valve and pressure Switch.

sounds like the contacts in the timer are burned or siezed

If your timer will not advance you need a new timer.

Push down on lid. You may have a bad lid switch. Start machine and press the switch down with something like a screwdriver and see if the motor runs.

CHANGE THE LID SWITCH

door switch bad?

Washing machine stops at the spin cycle - light flashes. Have to drain water out manually. Happened last week and was then able to run an empty rinse cycle. Machine worked normally for another week. Same problem today but have had to drain water manually from the drum after trying an empty 90 wash and rinse cycle (both stopped on the Spin and flashed). Any ideas? Thanks. x

your contacts swithces for rinse cycle inside timer could be burned or bad..very model I will locate part number