Manual and assembly instructions

Make and Model helps!!

Here are some 7 Cup Processors

Owner's Manual

KitchenAid https://www.kitchenaid.com > global > documents
Before operating the Food Processor, be sure the work bowl, blades/disc and work bowl cover are properly assembled on the base (see the "Assembling the Food.
56 pages

7 CUP FOOD PROCESSORS

KitchenAid https://www.kitchenaid.ca > global > documents

Insert the desired blade or disc into the work bowl. See next page for instructions. 5. Place the work bowl cover on the work bowl with the feed tube just.

Food Processor Manuals

Cuisinart https://www.cuisinart.com > manuals > food_processors

Find manuals for our current and discontinued food processor products. Maximize the performance of your food processor and learn about the safety features.

5KFP0719AOB-User-Manual.pdf

Winning Appliances https://www.winnings.com.au > public > manuals > 5KFP...
No information is available for this page.
Learn why
11 pages

Oster has not made a manual for your specific model available online. The User Guide for the Oster 3320 3-Cup Chopper with With Attachment, which appears similar to your model may be of assistance. This User Guide may be downloaded here.

I have an instruction manual for that model number 978 06a. I could copy it for you. Write me at [email protected].

I have an Oster Kitchen Center by sunbeam. It has the mixer, blender and food processor. When I attach the processor to try to use it the blades do not spin. If I push the siler know down with an objest it will turn. Am I missing some little piece to make it work.

The three most common sources of leakage are a worn/damaged gasket, a cracked jar, or a cracked blade assembly - all of these parts are available from Oster. If you are still under warranty, they might even be able to send whichever part you need for free. Their phone number is 1-800-334-0759 (they are owned by Jarden Consumer Solutions nowadays).

http://www.oster.com/manuals/oster/003200-000-000_English.pdf

you will need the free adobe acrobat reader if you dont already, chances are you do, I found this at oster.com

When you remove the regular chopper blade, it should fit on top of the stem. The chopper blade must be removed to use the slicer / shredder attachments.

Hi Janne,

I bought a DCL 8M about 20 years ago and still have the original manual. Mashing potatoes is one of the few tasks that the manual discouraged. The potatoes turn into glue. I tried mashing potatoes with the flat blade and extra liquid. It still tasted awful. I do puree potato soup in batches, First I mash all the solids (potatoes and leek or potato and tomatoes), then add the liquid. For some reason, pureeing the soup works well.

I am sorry I could not be more helpful.
Myriam