My liftmaster 2265 1/2 hp remote does not close

Question 1

0helpful

1answer

My Sears 1/2 hp pn 41A4315-6D won't open using the remotes. I tried reprogramming them with new batteries;didn't work. The electrical wall control opens & closes the door ok. Note: When trying...

Sounds like the receiver portion of your logic board has quit. The wall control is hardwired and doesn't use the receiver.

Sep 27, 2011 • Sears Craftsman LiftMaster Chamberlain...

0helpful

1answer

We have a lift master garage door opener, all of the sudden one day, our remote control, (car and remote) does not work to open and close the garage. Tried to reprogram by pressing the red button on garage...

Hello, W/D here.

Change out the battery in the remote, and then reprogram. It sounds like this may be the cause of failure.
Best regards, --W/D--

May 04, 2011 • liftmaster Chamberlain Garage Door Opener...

0helpful

1answer

I have a liftmaster 2265 garage door opener. The wall mounted door control does not work. The garage door does not open when I push on the Push bar.

page 29 may help you by looking at the manual for the model you have here if you do not have one

click onto the link below to view

http://www.bearcatco.com/PDF_OPENERS/Liftmaster/2265.pdf

Apr 11, 2011 • Garden

0helpful

2answers

Garage master 1/3 HP Security Plus. Will go with remote, but remote is pushed to close, light flashes. How to reprogram???

You don't need to reprogram. You need to make sure your door sensors haven't been bumped and misaligned. Each of them has a small light that will be lit when they are properly aligned. Tweak them a bit. If the light doesn't come on you probably have a sensor that has quit working.

Sep 20, 2009 • Sears Craftsman LiftMaster Chamberlain...

0helpful

1answer

Garage door opener will not respond to security plus remotes

Reset the Liftmaster unit. There should be a red reset button on the unit in the garage. If this does not work, reset the breaker. Good Luck!

Jul 03, 2009 • liftmaster Chamberlain Garage Door Opener...

0helpful

1answer

Liftmaster 1/2 HP opens on its own

5 nonth ols ia 315. wjere are remotes. on car seat? are pushbutton stuck. try disconnecting wire to each pushbutton or console. see if problem goes away. you have 100 billion codes

Jan 19, 2009 • Sears Craftsman LiftMaster Chamberlain...

1helpful

1answer

Liftmaster garage door opener will only work at wall unit

check electric saftey beams. shovel blocking them. dirty. aligned (LED on in each unit)

Jan 12, 2009 • Sears Craftsman LiftMaster Chamberlain...

0helpful

1answer

Remote Garage Door Openers won't work

Does your wall console have a LOCK or VACATION setting. Turn off.

Dec 13, 2008 • Sears Craftsman LiftMaster Chamberlain...

0helpful

1answer

One of the remotes manages both doors instead of just one

don't use that one! Seriously, you need to wipe out all codes and reprogram your keypad and remotes.

Nov 20, 2008 • Sears Craftsman LiftMaster Chamberlain...

0helpful

1answer

Liftmaster 1280 LMC Motion Detector Garage Opener Push Button Pad Not Working

Have you tried to reprogram the chanel again?
Changed the battery?

Jul 29, 2008 • Sears Craftsman LiftMaster Chamberlain...

Question 2

Anonymous

Master 3,197 Answers
Posted on Nov 12, 2009

Anonymous

Master

Joined: Apr 29, 2009

Answers

3197

Questions

1

Helped

1458745

Points

8183

If the door starts to close and the main light flashes 10 times and the door reverses to the open position it is a problem with the door sensors. Make sure they are pointed at one another and they each have a small light that must be on and not flickering.

If it starts to close but reverses and the main light does not flash 10 times it is possibly the RPM sensor which is a small printed circuit board just in front of the motor.

Related Topics:

Trustworthy Expert Solutions

My liftmaster 2265 1/2 hp remote does not close

1 Answer

Anonymous

Add Your Answer

Attachments: Added items

Related Questions:

My Sears 1/2 hp pn 41A4315-6D won't open using the remotes. I tried reprogramming them with new batteries;didn't work. The electrical wall control opens & closes the door ok. Note: When trying...

We have a lift master garage door opener, all of the sudden one day, our remote control, (car and remote) does not work to open and close the garage. Tried to reprogram by pressing the red button on garage...

I have a liftmaster 2265 garage door opener. The wall mounted door control does not work. The garage door does not open when I push on the Push bar.

Garage master 1/3 HP Security Plus. Will go with remote, but remote is pushed to close, light flashes. How to reprogram???

Garage door opener will not respond to security plus remotes

Liftmaster 1/2 HP opens on its own

Liftmaster garage door opener will only work at wall unit

Remote Garage Door Openers won't work

One of the remotes manages both doors instead of just one

Liftmaster 1280 LMC Motion Detector Garage Opener Push Button Pad Not Working

Not finding what you are looking for?

Craftsman LiftMaster Chamberlain Garage Door Opener Wireless Keypad Model 976LM Security+

My Sears 1/2 hp pn 41A4315-6D won't open using the remotes. I tried reprogramming them with new batteries;didn't work. The electrical wall control opens & closes the door ok. Note: When trying...

Ask a Question

Top Sears Building Materials Experts

Cindy Wells

Brad Brown

hsapiens

Are you a Sears Building Material Expert? Answer questions, earn points and help others

Manuals & User Guides

Keypad_Instructions_cl 976.pdf....

Related Topics:

Trustworthy Expert Solutions

My liftmaster 2265 1/2 hp remote does not close

1 Answer

Anonymous

Add Your Answer

Attachments: Added items

Related Questions:

My Sears 1/2 hp pn 41A4315-6D won't open using the remotes. I tried reprogramming them with new batteries;didn't work. The electrical wall control opens & closes the door ok. Note: When trying...

We have a lift master garage door opener, all of the sudden one day, our remote control, (car and remote) does not work to open and close the garage. Tried to reprogram by pressing the red button on garage...

I have a liftmaster 2265 garage door opener. The wall mounted door control does not work. The garage door does not open when I push on the Push bar.

Garage master 1/3 HP Security Plus. Will go with remote, but remote is pushed to close, light flashes. How to reprogram???

Garage door opener will not respond to security plus remotes

Liftmaster 1/2 HP opens on its own

Liftmaster garage door opener will only work at wall unit

Remote Garage Door Openers won't work

One of the remotes manages both doors instead of just one

Liftmaster 1280 LMC Motion Detector Garage Opener Push Button Pad Not Working

Not finding what you are looking for?

Craftsman LiftMaster Chamberlain Garage Door Opener Wireless Keypad Model 976LM Security+

My Sears 1/2 hp pn 41A4315-6D won't open using the remotes. I tried reprogramming them with new batteries;didn't work. The electrical wall control opens & closes the door ok. Note: When trying...

Related Topics

Ask a Question

Popular Questions

Garage door opens by itself

Sears craftsman 1/2 hp garage door troubleshooting

Garage door keypad code. How do I reset it?

Excessive opening force detected (code 42)

Lightning may have hit garage

Top Sears Building Materials Experts

Cindy Wells

Brad Brown

hsapiens

Are you a Sears Building Material Expert? Answer questions, earn points and help others

Manuals & User Guides

Keypad_Instructions_cl 976.pdf....