Buying a used Kenmore stackable washer/dryer

Yes, but you normally have to remove the case. In the case of a stackable unit, sometimes you can get in from the back panel.

https://www.google.com/search?q=kenmore+stackable+washer%2Fdryer+417.94702300+replace+water+level+sensor

..

Most stackers have a frame which goes around the top of the washer and a lip above which the dryer sits on. If you cant get the correct frame, ive seen Customers who sit the dryer on a towel above the machine and then at the back, use a couple of metal straps that have been screwed into the dryer and top of washer using the original screws that hold the backs on both machines.

Searspartsdirect.com

Gently pry up with a putty knife

if the washer is smoking... DO NOT USE!!!! probably a motor/electrical fault. either carry out a repair or buy a new one.

You will need to do the measuring, we don't have that kind of data here.

Hi,

There can be many reasons why your dryer will not turn...

This tip that I wrote will help you to figure out what is happening...

http://www.fixya.com/support/r4422207-dryer_repair_dryer_not_turning

http://www.fixya.com/support/r4460438-dryer_repair_dryer_will_not_start

heatman101

how do you seperate the stackables for moving

the washer works off the 220v cord on the back you have other issues with the washer sorry