My DVD player won't turn on. I tried the remote and also manually. The tray won't open either.

SOURCE: Conia M580 DVD player has

Easy... follow these instructions

• unplug from the mains
• take the cover off (3 screws on back panel, 1 screw each side, sticker on top front)
• You will see the DVD disk in the player drive
• Remove the plastic ******** top of the drive - 2 x small phillips screws
• Lift out the DVD disk.... done.

Testimonial: "Many many thanks for your help - your instructions were dead-easy to follow and I've now successfully rescued my much-prized "Black Books" DVD disc!!!"

SOURCE: dvd player wont open

Look on the bottom of your player. Between the two front feet you should see a narrow slot that is about 1 1/2" long (it should say "emergency hole". Shine a light into the slot, you should see a black pin about as big around as a pencil lead. Carefully push this pin in the direction of the arrow. It should release the drawer and allow you to open it.

SOURCE: sanyo 6100 dvd player-disc tray automatically opens whenever power is on.

Have you checked to see if it is off track? Sometimes when these machines get bumpbed, dropped, or fall they can jump track. You have to take the cover off and inspect to see if it is off track when it closes and opens. It should go all the way back on the track when it closes. Be careful not to shock yourself. If it is on when you do it and your hand touches the metal parts inside you can get seriously burned or shocked.

SOURCE: DVD tray won't open/eject

I had a similar problem, and I took the player apart to find that there was a motor that has a snap-in connection to a circuit board and it was just disconnected. I reconnected it and it worked fine. There are quite a few philips head screws to remove to get into the case. It slides off the back. Once inside, it's very simple looking, it is really un-intimidating. You may have 4 more very small screws to remove directly on top of the DVD tray. If you need to take it off to see under the tray that is. I'd like to guess the problem is that the motor that ejects the tray is disconnected.

SOURCE: Locked dvd tray.

Press and Hold EJECT Button, While UNLOCK Is Displayed :-)