Heard a loud pop and picture went out. Still have sound

I would first remove the lamp and look to see it is intact and not shattered inside.

Bulb may have popped. Cheapest fix, unless your an electrician it the only thing to really try before replacing set.

Ur LCD inverter board it dead.Replaced this board u will get ur picture back.Tries websites like shopjimmy.com,Ebay.com to buy a refurbish LCD inverter board for the replacement.It a long shape board.

Power supply board is dead.Replaced this power supply board will fix this problems.Tries Shopjimmy.com,Ebay.com to to buy a refurbish power supply board for the replacement.

Ur Main Tuner signal board is dead.Replaced the Main Tuner signal board will solved ur picture problems.

sounds like a large capacitor has gone on main board
check for swelling or bulge/can be square blue in colour

If there is no picture but sound is audible then replacing the projection lamp will do otherwise, the TV requires to be diagnosed for any other hardware damages.

This sound is a capcitor pop and this could be in the power supply unit itself. The glass could be a fuse that took the brunt from the capcitor pop.

1. Unplug the unit and do not plug it in.
2. if its under warrenty take it in please!
3. if its not under warrenty and you know eletronics verify what cap popped and replace that and the fuse.
4. if you do not know about eletronics this work would cost you around $150 for the wrok done.

Good luck I hope this information helps you!!



Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620

My TV has a picture but its very poor quality and its fading ,blurry color it is not clear what can i do to fix.Thanks

The loud pop was a capacitor blowing up or the high voltage transformer blew up. Very common problem.. if its the Transformer be expected to pay 250 or more to have repaired.