Washing Machines Logo
Posted on Oct 12, 2009
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

On my Maytag Neptune MAH-3, the water is running non-stop

On my Maytag Neptune MAH-3, the water is continuing to run and fills up the front load washer and won't stop unless I turn off the water manually.

2 Answers

Virgil Watts

Level 2:

An expert who has achieved level 2 by getting 100 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Sergeant:

An expert that has over 500 points.

  • Maytag Expert 267 Answers
  • Posted on Apr 30, 2013
Virgil Watts
Maytag Expert
Level 2:

An expert who has achieved level 2 by getting 100 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Sergeant:

An expert that has over 500 points.

Joined: Jul 16, 2010
Answers
267
Questions
0
Helped
66276
Points
513

Check inlet water valves cold & hot one may be sticking open & can't shut off. The timer may not be shuting off valve , voltage needs to be removed for valve to close. Pressure switch cuts the valve off but goes through timer.

Anonymous

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

  • Contributor 1 Answer
  • Posted on Nov 02, 2009
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Joined: Nov 02, 2009
Answers
1
Questions
0
Helped
590
Points
1

Check plastic hose out side of tub to pressure switch
if ok replace pressure switch

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

On the Maytag Neptune MAH 5500, the timer is running through its cycle without stopping to complete that cycle. In other words if rinse is selected the wsher fills partially and you can watch the timer...

Hi


Thanks for using FixYa. It seems to be an issue with the Timer motor going bad and should be replaced to resolve this issue. Everything seems to be working fine as the washer is filling with water spinning etc so it is the Timer that should be replaced.
Please do accept the solution if the issue is resolved or post a comment for further assistance.


Thanks
Rylee
0helpful
1answer

My frontloader washing machine I(Neptune MAH

unfortuetly that is a common problem with that unit. it will continue to have wate in it afte the cycle has ended. i hate to say it but there is no solution for this proplem. I would recommend that you contact Maytag and let them know your disappointment. sorry for that news.
0helpful
1answer

Water fills and overflows the dispenser department.

if car over heats u might have a head gasket problem or ur thermostat is stuck not letting the fluid circulate
3helpful
1answer

MAYTAG NEPTUNE MAH9700AWW continues to fill on rinse, code "oe",

if the water continues to fill even with power off, and you have to manually shut in off at the wall valve, the 3-way inlet valve is stuck open. you have to replace it. $90
0helpful
1answer

Maytag Neptune MAH-1 won't stop filling with water

A couple things may be going on here... you may not want to hear, but the Neptune has a had many "consumer related problems".

If your complaint is "will not stop filling with water" I would access your inlet water-valve (typically blue with 2 black battery looking solenoids; where your water-lines connect directly), test for continuity and replace as necessary. Sometimes inlet-water valves also go bad where the complaint is: "no water comes in at all".
0helpful
1answer
0helpful
1answer

MY NEPTUNE MAH4000AWW WORK WHEN IT WANT TO WORK

Check for low water pressure. Clear screens in inlet valve. Do-not remove screens. This unit will turn off if not filled in specified time.
0helpful
1answer

MY NEPTUNE MAH4000AWW WORK WHEN IT WANT TO WORK

Sounds like you have an intermittent problem with the board or one of the on board switches.
2helpful
1answer

Water fill

Try unplugging the unit. If it stops filling you have a control board problem. If it continues to fill, you have a bad fill valve that is not closing properly, usually because of dirt or scale buildup thats gotten past the inlet screen on the valve. Good Luck!
Not finding what you are looking for?

600 views

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

john h

Level 3 Expert

29494 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...