Flashes "change lamp" after a couple of hours run time. I do not have the projector sitting on anything hot, and it has plenty of room around it for cooling.
I got a new lamp and it lasted about 40hrs run time total. I use it to watch 1 DVD each evening. After approx 20 hours of run time since new, it would show "change lamp" in yellow occasionally upon start up. Last night it changed to a red "change lamp" annunciation and shutdown the projector.
Thanks
Reset the lamp timer.
1,Connect the power cord.
2,While simultaneously holding down "menu","enter" and "down" on the projector, press "standby/On" on the projector and keep all four buttons pressed down until the lamp indicator starts blinking green.
"LAMP 0000H" is displayed, indicating that the lamp timer is reset.
Have a nice day!
We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip, color wheel,
motherboard, powersupply ... with high quality and competitive price.
Jerry
Lampdeng Limited
SOURCE: C20x lamp error
Hi,
This is due to thermistor problem. Near to the lamp one thermistor will be there please check connectivity. if it is failed please change the same.
Regards,
prakasam
SOURCE: PG-C45X projector wont power on
To solve this problem, simultaneously press the "Input", "Enter", and "Undo" buttons. While holding these buttons, press "On". When the project turns on, you should see "LAMP 100%". This indicates that you have successfully reset the lamp life timer.
SOURCE: Recently I was using my xv-z90u, I started the
There is no problem here, the sharp projectors just do this until you enter the reset procedure. It comes on a sheet with your lamp. they differ from projector to projector. often involves hold down power and some arrows while plugging in the projector - that will reset the lamp timer and you will be away!
SOURCE: I bought a new lamp for my sharp XR-11XC.
have you reset the lamp timer yet? can't remember the procedure for that one exactly often hold power and down and left arrows whilst plugging in power. Check info on instructions that came with your new lamp.
Testimonial: "Thanks, it works after reset."
229 views
Usually answered in minutes!
×