IUSED MY DAZZLE DVD RECORDER MANY TIMES BUT

you can download on this page:
http://www.pinnaclesys.com/PublicSite/us/Products/Consumer+Products/Dazzle/Dazzle+Video+Archiving/Dazzle+DVD+Recorder+Plus+Support/Download+Area/Drivers+-+Updates/IDVDR2_0FULL.htm?mode=documents

If you install it as you would on XP it should work. Check this link http://www.pinnaclesys.com/PublicSite/us/Products/Consumer+Products/Dazzle/Dazzle+Video+Archiving/Dazzle+DVD+Recorder+Plus+Support/Contact/Contact+Support/Contact+Support+for+Dazzle+DVD+Recorder

Hi patrick,

Looking up the Dazzle DVD recorder, I found this:

System Requirements

• Platform: Windows Vista / XP

But, Pinnacle who makes the Dazzle does have this info on Mac Video capture:

http://www.pinnaclesys.com/PublicSite/us/Products/Consumer+Products/Home+Video/Studio+Family/Video+Capture+for+Mac.htm

Hope this helps

Did you configured it um PAL or NTSC color system ?

Welcome to fixyah,

Open your Studio 12 and then click on capture tab and then go ahead and click on setup capture source under video click and choose your dazzle device. Connect your yellow red and white cable to your dazzle and then end part to your HI 8 camcorder. Open your camcorder and when the video showing to your preview windows of Studio 12 then hit start capture

Unfortunately I do not know what a prosumer is (do you mean producer?) but what I would do is produce an image file rather than write direct to disc and then use nero or imgburn to burn the disc.(I prefer Imgburn and not just because it is a free open source prog).

Give it a go and get back if the problem remains.

I managed to get it to work by doing the following:
1. Installing the program and plugins/drivers included on the disk that comes with the device 2. Updating my Skype program to the newest version 3. Going into the Skype Webcam options menu and setting my Webcam input device to the the Dazzle DVD recorder (or what ever type you have) by selecting it in the drop-down selection box
I hope that this works for you :)

Hi and Welcome to Fixya,

The reason why it is now showing because your computer did not detect it. If your Windows operating system is vista 64 bit then go ahead and download the driver in here. www.pinnaclesys.com then click on support, download/Studio and dazzle hardware for vista.

Hopefully it helps you.

Check your audio device under device manager. By locate this check one.

Click on Start>Control panel>system>hardware>device manager>sound and video games controller> right click on video capture device and uninstall it. Restart your computer. After you restarting the computer make sure that new hardware found message coming out. After you did that open again your IDVDR or Pinnacle Studio program and then check if the same problem.

Please try to uninstall the program Instant DVD Recorder.

Download the latest version of Instant DVD Recorder in the link below which is the 2.6.

http://www.pinnaclesys.com/PublicSite/us/Products/Consumer+Products/Home+Video/Studio+Plug-Ins/Instant+DVD+Recorder+Support/Download+Area/Drivers+-+Updates/IDVDR261.htm?mode=documents&Display=1

Make sure that the program that you have must be uninstall first before you start downloading the file and install it.