SOURCE: Sharp R 1610 Microwave Lights
For your reference, we repair this control panel assembly problem for customers nationwide for $32.50.
SOURCE: The turntable on my microwave/convection
You can see and hear a video of how a turntable motor should sound when you rotate it by hand.
If yours won't rotate or it sounds like it's grinding, etc., you may have a bad motor or plastic coupler.
To
replace either, you need to unplug power, then remove the bottom cover
of the oven. You may have to cut the cover off with snips, then use a
screw when reassembling it.
We have the full service manual for this oven, and have uploaded it to our site here.
The best place to order Sharp parts is Tritronics.
We're happy to help and we appreciate your thoughtful rating of our answer.
SOURCE: Can you direct me to
here's the link to download via Sharp in pdf format...
http://www.sharpusa.com/products/TypeManuals/0,1083,5,00.html
Once there, scroll down a bit and you'll seee the download link for the R930 CS/AK/AW series
SOURCE: Sharp Microwave stopped working. lights up, counts down. Fine'
High voltage power supply for the magnetron is likely problem. Multi-thousand-volt section--be careful.
SOURCE: Sharp Microwave Model R-510B Light burned out -
Generic answer:
You probably have to remove the case. DO NOT TOUCH THE SILVER CAN - LETHAL. There are probably 8 phillips or torx head screws to remove the cover.
Alternatively, their may be access inside, where I would look first.
Let me know if this works.
a
166 views
Usually answered in minutes!
×