How we can solve Brother Printer Error Code 76?

SOURCE: brother fax machine intellifax 2600

Fuser or overheat error it will probably be followed by a 77. Menu, mode and 0 quickly in that order will give access to user maintenace mode (lights will flash once your into the mode). Hit 91 to reset the machine. If this doesn't work you have a major problem with your fuser unit and it will need to be replaced. DO NOT DO THE ABOVE PROCEDURE MORE THAN ONCE AS YOU WILL START TO MELT STUFF IF THERE IS A MAJOR PROBLEM.

SOURCE: Brother Fax 4750 System error 76

try resetting the machine by pushing the features button, and then *2864 in quick succesion, if done correctly you will enter test mode, then enter 91, and then after that clears enter 99 to exit test mode. make a copy to see if it works, and if it doesn't it is time to replace the fixing assy.

SOURCE: Brother MFC 9030

Open the printer and check to see it your fuser is worm up. Do not touch the fuser. If it is cold. you have a problem.

You fuser may be at end of life. Need to be replaced.
cost price of fuser and labor will come close or above cost price of machine. your choice.

Good luck

SOURCE: getting error 1628

Upgrade to Windows Installer version 2 or newer version. To do this, follow these steps:

1. Start Microsoft Internet Explorer, and then browse to the following Microsoft Web site:

http://msdn.microsoft.com/downloads

2. In the left pane tree menu, click "Setup and System Administration", and then click "Setup".

3. Click "Windows Installer", and then click the appropriate link for your operating system.

4. Click "Download" to download and install Windows Installer version 2 or newer version.

SOURCE: my printer brother DCP115C ''UNABLE TO CLEAN error code 50''

Machine error 50 is a error in Purge unit.You can't fix it by yourself and your printer need service.In most case the cost of repair is more than cost of new printer.