SOURCE: i cant access my router(EDIMAX BROADBAND ROUTER)
Warning the following instructions are likely to RESET THE ENTIRE CONFIGURATION OF THE ROUTER and you will need to reenter it completely. Do not follow these instructions unless you are prepared to reconfigure your router completely from the factory defaults. I am not sure but be careful or consult with EDIMAX support before proceeding.
note the following is from the http://www.edimax.us/ website follow technical support and click
BR-6104 / 6104W /
6104P
Then
If I forget
my password, what can I do?
I hope this helps.
SOURCE: cant login to router
When in doubt double check your work. You held the reset button down on the back of the router for long enough for the lights to go out then start blinking again? Then you went to 192.168.100.1 in your browser and tried admin for your login name and motorola for your password? If you did all of that and it's still won't accept your login try to power the router off for at least a minute by pulling the power cord and make sure you clear your browser cache before trying to access the default gateway address in your browser again.
Hope that helps!
Jill
SOURCE: cant log into yahoo mail
I am having the same problem. Tried everything they suggested and nothing yet. As far as I am concerned, it is a problem with their systems.
SOURCE: i cant log into the admin account on 192.168.1.1
press the RESET button on the back of the router and hold it in for 30 seconds. Use a pin. Once you have reset the router it will default to a generic user name and password. The default user and passords are admin admin or user user
If you still have trouble call support
Telephone (North America) 877-ZHONE20
SOURCE: Problem
point your browser to -> 192.168.10.1
default user and pass is:
user: guest
pass: guest
(i have tried posting this solution 5 times now and it never shows up!)
54 views
Usually answered in minutes!
×