Question about Sharp Office Equipment & Supplies

Open Question

I have one machine Sharp MX-314n gives H5-01 code , it needs to resat the code , i tried to enter SIM mode by pressing #*C* The menu of SIM mode does not appear , there is empty screen need solution.

Posted by on

Ad

5 Suggested Answers

Andy Bebb

  • 62 Answers

SOURCE: Sharp AR-5127, the error code U2-40

U2-40 is a board error, F1-15 is finisher lift motor error.

To reset: #, interrupt, clear, interrupt. (screen should say service mode), enter 16, print, are you sure? , yes.

For the finisher error, follow above procudure, entering 14 instead of 16. if error returns, disconnect the finisher

Posted on Nov 28, 2008

Ad

Anonymous

  • 1 Answer

SOURCE: Sharp service code H5-01

To enter simulation mode to reset errors enter this sequence on keypad.
P, * , CA , P then enter sim # 14 to reset code.
press " custom settings" button to return to previous menu and CA to exit sim mode.

Posted on Dec 11, 2008

Ad
ipodslinger

Steve Brown

  • 688 Answers

SOURCE: enter passcode screen is on, unable to enter code, appears frozen

you can fix it by restoring it in iTunes.
Here is a way to put it in recovery mode.
Normal 0 MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman";} Iphone and itouch dfu mode

Plug the usb cable into the Ipod and NOT into the computer.
Hold the Home Button down for 5 second (do not release it)
Then Press and hold the Power Button for approx 10 secs (count them out)
Your iPod will reboot.
Release the power button and continue holding the Home button for an additional 27secs.
You may see the screen go blank or not.
Plug the USB end into the computer with itunes open.
Your ipod will mount in recovery mode.
Restore it and Your all set.

Posted on Jun 10, 2009

Tony A

  • 189 Answers

SOURCE: Problems changing region code on Samsung DVD player VR 375

HELLO!
Give these a try!
Power ON
Press MENU
Enter code 57538
The current region code appears
For codefree/multi-region press 9
Press Open DVD door button
Power OFF and power ON

You could also try this!
Turn player on without disc inside Press MENU button
Enter your region code (See list below)
Highlighted 'region area number' will appear in the upper-left corner (on some players)
Press 9 to multi-region the machine
Turn machine off
Region 1 - 29334
Region 2 - 38767 (or 5 7 5 3 8)
Region 3 - 56732
Region 4 - 76884
Region 5 - 53814
Region 6 - 24462

Have a go and good luck! (:-)

Posted on Sep 11, 2009

sonyamw

  • 55 Answers

SOURCE: 2001 Audi A4 radio in safe mode. Battery was

sorry to say, you will need to take it in, it needs to be hooked up to their computer to reset and have it start up poperly. It just like a pc when it crash it will try to start in safe mode until you select "Normal" start up

Posted on Oct 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What causes error code E7-14 on a Sharp MX-M363N?


Haven't come across that one before:

Trouble content
Detail SCU
Cause SCU PWB trouble.
Check & Remedy Check the SCU PWB.
Replace the SCU PWB.

You could try resetting the machine:

START (Copy mode)
Press the Program key.
Press the asterisk (*) key.
Press the clear key.
Press the asterisk (*) key.

enter 14, execute

Cheers

Andy

Jan 20, 2017 | Sharp Mx-M363n Copier, Printer & Scanner...

1 Answer

My machine sharp MX 3100N is giving the error code U2-05, what steps should i use to solve it


Hi,
This error refers to a discrepancy between the HDD & the machine. If the hard drive has not been swapped out & nothing has changed on the machine then try resetting the copier to see if that rectifies it.
To reset the machine you will need to enter simulation mode.
First, make sure the copier is in COPY mode.
Then press the following 4 keys in quick succession: # * C *
You should then have a screen showing simulation mode.
Then enter 16 & press either of the copy keys (black or colour).
This should then display U2 ERROR RESET.
Press EXECUTE, YES then press the CA key.
The machine will exit simulation mode & restart.
If after restart the machine displays U2 again then you will probably have a HDD fault. Unfortunately, the HDD would have to be replaced by an authorised dealer as new Firmware would have to be reload to allow the machine to recognise a new HDD.
Hope this helps.
Dave.

Jan 19, 2017 | SHARP MX-3100N

1 Answer

Sharp mx 2300N error code U2-41


The U2 errors are usually related to memory or board level issues. You should try to disconnect the fax and network and then kill the main power inside the cover. Turn the main power on and then when you get a solid green light on the control panel press that power switch. If the machine boots with everything disconected then try conecting the options one at a time and try rebooting each time to see if you can narrow down the problem.

I’m happy to help further over the phone at https://www.6ya.com/expert/ethan_e84416e0b13809d2

Oct 16, 2014 | Sharp MX-2300N Color Copier

1 Answer

We have a code h4-30 on a sharp mx-2700n how do I reset?


You need to make sure the machine is in Copy Mode when you hit
# * C *
enter 14, then touch start
execute on the screen
the machine will reboot and the code should go away.

If it persists you may need some maintenance. If you're in Houston give us a shout. Our labor rates are low compared to the other Sharp dealers in Houston.

Skelton Business Equipment Houston Copiers
http://www.youtube.com/equipmybiz

Jul 07, 2014 | Sharp MX-2700N Color Copier

1 Answer

How to see how much toner is left


Press and hold exposure button for 5 seconds red lights will come on then press and hold % button it'll show toner level in percentage

Jun 18, 2014 | Sharp MX-M314N Copier, MX-314N, MX314"

1 Answer

SHARP MX-3100N CODE E7-06


MFP -Image data decoder error
Try to clear code. enter sim with program key- asterisk*-clear key- asterisk*(P-*-C-*) enter sim 14 print key execute yes clear all machine will reset. if code comes back it is not just not a fluke and you may have another issue.

Aug 28, 2011 | SHARP MX-3100N

1 Answer

Code:fk1 sharp 2301 N


That is a maintanence code. Usually says that the fuser rolls are at a certain copy count.
Here is what to do.
Press in order on the consol. # * C * That will enter the machine into what is called SIM mode.
Then enter the number 24 then 4 for that code, then press execute. You may want to just do the clear all maintenance code too.

Apr 26, 2011 | Sharp MX-2300N Color Copier

1 Answer

Sharp service code H5-01


To enter simulation mode to reset errors enter this sequence on keypad.
P, * , CA , P then enter sim # 14 to reset code.
press " custom settings" button to return to previous menu and CA to exit sim mode.

Dec 10, 2008 | Office Equipment & Supplies

2 Answers

Sharp MX-2300N Reset


Type in "p" "*" "C" " *" (that is p button, star button, p button, star button.) the machine will go into sim mode enter 14 then press execute which appears on the lcd and the yes to confirm, then press CA and the machine should turn off then back on again

Jul 20, 2008 | Sharp AR-BC260 Color Copier

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Office Equipment & Supplies Experts

Anthony Karuku

Level 2 Expert

268 Answers

amir hamza
amir hamza

Level 2 Expert

318 Answers

Tareq Bin Mostaq...
Tareq Bin Mostaq...

Level 3 Expert

1449 Answers

Are you a Sharp Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...