Jvckd-a925bt powers on then turns off after 3 second

Online manual:
JVCKD-G632

Como va conectado mi est?reo jvckd-R210

Adaptors are available via metraonline.com or from Crutchfield.

Try contacting at [email protected] ; they could helpful send it serial, model and brand.

Step 1: Turn off the PLAYSTATION 3 by holding the Power button on the front of the unit till the Power light is red.

Step 2:

1. Touch and hold the Power button, you will hear the first beep, meaning the PLAYSTATION 3 is powering on.
2. Continue to hold the Power button and after about 5 seconds, you will hear a second beep, indicating the video reset.
3. Continue to hold the Power button and after about another 5 seconds you will hear a third beep and the system will power off (Power light is red).

Step 3:

1. Touch and hold the Power button AGAIN, you will hear the first beep, again for the PLAYSTATION 3 to power on.
2. Continue to hold the Power button and after about 5 seconds, you will hear a second beep for video reset.
3. Continue to hold the Power button and after about another 5 seconds you will hear a quick double beep. At that point release the Power button. If you succeeded in activating Safe Mode, you will see a message on the screen saying, "Connect the controller using a USB cable and then press the PS button."
4. Connect a USB cable to the controller and the PLAYSTATION 3 and press the PS button to enter Safe Mode.
5. Then you will see the Safe Mode menu.

*****CHOOSE RESTORE FILE SYSTEM WHICH IS OPTION 3****

and DONE!!

www.1RepairStop.com

Hello... sorry you are having a problem with this unit. Here is the procedure to fix your problem. Press and hold the "SEL" button for approximately 2-3 seconds. You will enter the menu section. Press the seek button below the volume knob ">>>" until it reads "Clock-H". Rotate the volume knob to adjust the hour. Press the ">>>" button again and "Clock-M" should appear. Rotate the knob to adjust the minutes. Hit SEL button to exit the menu when you finish. I hope this helped!

20 year car audio/video installer
Bay manager

code jvckd-nx1r model n:KDNX1RB serial: 127c1616

Select any one button (except POWER, START, and STOP) and follow
the steps below, using the same button (remember the button):
Press/hold
3 seconds
➔ Release for
3 seconds
➔ Press/hold
3 seconds
➔Release for
3 seconds
➔ Press/hold
3 seconds
All indicators on the console will
momentarily turn off, then turn back on with 88 displayed. After
5 seconds, the Automatic test begins.
Use the tech sheet info on page 2 as a starting point

Note to get the exact tech sheet or manual for your machine go to ServiceMatters and post your model number.




If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

press the number for 3 second
example, if you want a 104.7 in number 6, press # 6 for 3 second.

same equql problem....?????

Can you help?



i have a denon 1720 dvd player. When you press the power button it comes on for 3 seconds then the power button turns back red and powers off. If you press the eject button within the 3 seconds the tray opens and the power button stays green. As soon as you close the tray the power agin goes to red. i have a denon 1720 dvd player. When you press the power button it comes on for 3 seconds then the power button turns back red and powers off. If you press the eject button within the 3 seconds the tray opens and the power button stays green. As soon as you close the tray the power agin goes to red. Can you help? thanks thanks