Hoover Quest 1000. It just goes on Beeping and nothing happens when I press Dockin

The make appears to be known for beeping. Try a power reset. Pull the wall plug for 5 minutes.

https://www.google.com/search?q=Samsung+RFG297HDRS+cool+select+pantry+keeps+beeping

Video

if you watch carefully, the end light flashes and then stops, and then flashes again... how many times flashes?

If the pc plays on some of the games without going blank, I will suggest two things for to do. Adjust the screen resolution perhaps a little higher than what you have now. Finally, upgrade your RAM capacity. However, reverting to your former card can do the magic as I can sense that the new card may be running higher than what PCI socket on your mainboard can carry. It may be incompatible and only managing for now. Good luck

wow, that is so weird...i was just getting ready to write the exact same thing. this last time mine beeped, i just kept letting it beep for several minutes. if kept on. i then went in and pressed all the buttons except for cancel and nothing happened. then i pressed the oven light button. the beeping stopped. not sure if it's coincidence or if that was what i was supposed to press. i will keep messing with the buttons and let you know if i figure it out. i will dread if it beeps all night long.

try to install it in your administrator user( you press F9 in boot and choose safemode) and install the file. if the autorun starts and nothing happen when you press install you restart your computer and install the game on your normal user and the game should work perfect =)

Hi Nicky,
We just had the same problem; and we've solved it.
Press the MENU button (4 times) until the Pure Water LED is flashing; then press and hold the SET button down until the screen goes back to the main menu.
SORTED!
Catherine & Matthew

needs repair software fault

Hi, I posted the same problem. I unplugged the unit overnight, and now it works. don't know if this will help, but it works!!!! :D

One ov my decks (same Gemini PT-1000 II) had the same problem. Just open it and clean the micro switches underneath the big buttons. It worked fine for me.

You may have the R. margin there. Space all the way to the right, press R MAR key. You also could have spellcheck on code 1 will turn it off