How to set region code on my LG DP132 DVD player

Try using procedure given on following page.

Programming Time Warner Remote Codes: Your Quick Guide [2023] (theproductanalyst.com)

Here.
https://www.videohelp.com/dvdhacks/lg-dp132/12291

https://www.videohelp.com/dvdhacks/lg-dp132/12291

Power ON with NO disc inside:
Press PAUSE on the remote-control
Press 3,1,4,1,5,9 in sequence using the remote-control
Press 0 on the remote to select Region Free
Press PAUSE again to save
Power OFF then Power ON.
Done.

If you know how to access the region code, then I suggest you give it the code for "0" then you will not need to change it again. It should play back all.

Seek info you need on Internet

http://www.lg.com/us/blu-ray-players/lg-DP132-dvd-player

Looks like you only have composite out (yellow, red, white RCA cables) from your DVD player. If you have a newer TV, check to see that you have composite as an input choice.

Hi!
Maybe the region code.
Please give more details, so we can help you!!!
No error code?

Google it for solution

1.Switch on the DVD player without any Disc inside
2.The screen should display 'no disc'
3.Eject to open the DVD tray
4.While the tray is open, press the 'STOP' button then hold the 'ENTER' button for 5 seconds
5. A new screen will appear (Regional Management Test Code) which will allow you to change the region code using the up and down arrow keys on the remote control.
6. Change the code to '0' and press the PAUSE key to exit