Question about Kenmore Washing Machines
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: Hotpoint washer
Two types of Hotpoints had two different ways of removing the agitator. One had a pop off top that when you removed it, you can remove the center bolt, the remove the agitator. Another one you had to put your fingers under the agitator and pull straight up to unclip the agitator. Good Luck!!! Jim
Posted on Sep 09, 2007
SOURCE: Lid Switch for Washing Machine
pop trims from ends of control panel
remove screws from bottom of control panel under trims
slide control panel forward and up from the bottom, and flip over backwards on its hinges
undo brass clips under control panel, NOTE* how the clips are installed
unplug lid switch cable
lift cabinet slide forward and remove cabinet
turn cabinet upside down
lid switch is accessible
assemble in reverse order
Posted on Aug 29, 2008
SOURCE: Washing machine will not start
It is your central control unit...........try ing hitting the top with hand toward the back of machine sometimes there is a short in the CCU and a little shake will correct
Posted on Jun 10, 2009
Simply attach both wires from the switch to jumper.
Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.
Posted on Sep 11, 2010
Tips for a great answer:
Sep 16, 2017 | Kenmore Washing Machines
Aug 25, 2017 | Kenmore Washing Machines
Jan 23, 2016 | Washing Machines
Dec 13, 2015 | Washing Machines
Nov 26, 2015 | Washing Machines
Feb 26, 2012 | Kenmore Washing Machines
Nov 18, 2017 | Kenmore Elite Oasis 27052 Top Load Washer
Sep 21, 2010 | Kenmore Oasis HE 27082 Top Load Washer
Feb 09, 2010 | Kenmore Elite Oasis 27052 Top Load Washer
Nov 20, 2019 | Kenmore Washing Machines
30 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: