Need a manual. We can't get it set. Please tell us how?
SOURCE: Need the RAV-300 Remote Control Setting Steps
RAV311 WJ40930 US
(1) To program the remote to control a TV, press and hold [TV] for at least 5 seconds. To program the remote to control any other device, press and hold [AV] and the desired input button, (i.e. Press and hold [AV] + (DVD) at the same time for 5 seconds for a DVD player.
(2) Enter the 4 digit code for the device
Hope this helps.
SOURCE: i need manual settings for gprs
It appears to be this simple.
Click Properties -> Advanced and add
+cgdcont=1,"IP","airtelgprs.com",0,0
Without the quotes.
I don't have the phone to check it tho.
Regards
Philip
SOURCE: Tappan Series 110 Gas Stove Owners Manual
stovetop works well, oven will not ignite. Whats up?
SOURCE: Cannot set the time, need manual for our RCA RS2620 system
hold in the "clock" button until the hour flashes
use the forward & back buttons for the cd player to set the hour. (located just to the right of the equalizer" button)
once the hour is set, press the "clock" button until minutes are flashing.
use the forward & back buttons for the cd player to set the minute.
once done, press the "prog.set" button below the forward & back buttons
SOURCE: setting time and date
Hi. Turn key to Program mode. Type new time in 24hr format Press X/DATE TIME button Press Clear (C) Then enter date as YYMMDD Press X/DATE TIME button Press CLEAR (C) Turn key back to REG mode
51 views
Usually answered in minutes!
×