My lg fuzzy logic 1060 has stopped, dE is flashing, what does this mean and how do I start the program again

SOURCE: LG Fuzzy Logic won't drain out the water

Click on your brand name (below FIXYA) on this website, type in your model number & search. You will get a shortlist; click on your model, below the page u will get Manual/Guides. Click on the blue, voila! u hv your manual on line. And dont forget to rate me, on this great site.

Gintautas Maldzius

• 221 Answers
• Posted on Aug 07, 2009

SOURCE: I have an LG Fuzzy Logic top loader. it keeps draining water out

If it's really as you described, when draining at the same time filling up, then it's a problem in the main control board. You'll need some electronics knowledge to repair it, or just replace the main board

SOURCE: LG washing machine fuzzy logic 8.5 kg not agitating

The reason to this problem can be due to any one
of these reasons.
Lid Switch
Motor Coupler
Belts
Clutch
Drive Motor
Drive Pulleys
Transmission
Agitator

SOURCE: I'm using LG Fuzzy logic 6.5kg WF-S6607TC.

Check the lid cover. At the edge, there is a plastic housing some sort of a magnet. This is the magnetic sensor for lid cover open protection.
If the magnet is not there, place a magnet at the position on the washer where the housing will come in contact with the washer when lid is close.

SOURCE: LG Top Loader Fuzzy Logic 5.5. The water

Hi,
No you just need to get the drain hose up higher...the water is siphoning out and is either caused by the end of the drain hose still in water and not having an air gap or the hose is not going up higher then the top of your washer...
Lifting the hose up should give you an air gap and get the hose high enough to stop the siphoning...

heatman101

Testimonial: "I am extremely impressed that this won't cost a call out service fee. . . and looking like a bimbo. thanks, heatman!"