SOURCE: NEED A MANUAL FOR Konica Minalta Dimage Z1
Found on the internet under the heading Free download for rhe Konica Minolta model Z1 sent via PDF.
Many thanks for your efforts on my behalf as I could not find it at the time of my request.
Ahappy new year to one and all.
Ronnie
SOURCE: What is m2 code how cani reset in Konica Minolta
This is to display the count of the supplies life counter.
When the counter is reached to 0 life 1 will be detected and maintenance call M2 will be appeared.
The initial value is 40,000, and the countdown system is used.
Use Setting/Procedure
- To clear the count, use [CLEAR DATA] of the Service Mode.
SOURCE: konica minolta bizhub 164 showing M2 maintanaince call
You need to replace 1st the consumables before simulation/reset to prevent further damage to Bizhub 164.
SOURCE: proceed to continue using the machine konica minolta bizhub 165 when I get the message error M2
THEN CHANGE THE DRUM UNIT OR DEVELOPER
37 views
Usually answered in minutes!
×