Question about Electronics - Others

1 Answer

How can I solve problem of error e.oc in keb f5

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Master
  • 1,994 Answers

Error. Over Current - Peak current exceeded
Possible causes:
Motor has a short - Phase to phase or phase to ground.
Motor cable damaged/defective.
Motor cables too long.
Acceleration/deceleration ramps too short.
Damaged output phase of inverter.
EMI

Posted on Oct 14, 2019

Ad

3 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

mntech1

  • 120 Answers

SOURCE: F5 KEB inverter nop problem

If using bus communications (Can, ProFi, Mod, ext), there may be a communications command (Software signal) that is not being provided. Hardware and software enable signal required to obtain LS.

Possible that the terminal on the control card is bad due to miss connection or signals outside of the rated value.

Posted on Apr 01, 2014

mntech1

  • 120 Answers

SOURCE: Fcon in keb f5

Forward CONtinues

System is at the commanded speed in the forward direction.

Posted on Apr 01, 2014

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

E oc in f4


Error Over Current.

Disconnect motor leads at U/V/W terminals and run the inverter to determine if the problem is internal or external of the inverter.

If it is external then you are looking for a shorted winding in the motor or a shorted motor lead between the inverter and the motor.

Mar 05, 2014 | Inverter KEB COMBIVERT F5

1 Answer

E OC error in F4 KEB


Error. Over Current - Peak current exceeded

Possible causes:
Motor has a short - Phase to phase or phase to ground.
Motor cable damaged/defective.
Motor cables too long.
Acceleration/deceleration ramps too short.
Damaged output phase of inverter.
EMI

Mar 05, 2014 | Inverter KEB COMBIVERT F5

1 Answer

What Error COM KEB mean ????i have F5 version


The KEB inverter does not have a "COM" error.

Where is this error being displayed?

Check your inverter baud rate, inverter address, communications cables and device that is being used to communicate.

Feb 12, 2014 | Inverter KEB COMBIVERT F5

1 Answer

Need a Way to adjust dr.2 Rated Motor Current value. Combivert F4-C


It sounds like you may have a thermal issue causing the fault trigger of the E.OC error. This coould be an issue with the motor or the inverter getting too hot. Once the system trips into error it is allowed to cool a little and you can run again for a while.

What is the actual part# and serial # of the inverter that you are having problems with?

Since they system has been running, I would not suggest aultering the voltage/hz curves in the inverter because of an E.OC error.

Dec 28, 2013 | Inverter KEB COMBIVERT F5

1 Answer

Eoc alam


E.OC is an over current error.

The inverter is sensing a short on the U/V/W terminals. This could be a shorted motor, motor leads and an internal short in the inverter.

Disconnect the motor leads from the inverter, and run the inverter as you normally would.

If the E.OC error does not occur the short is external of the inverter.
If the E.OC occurs, then the short is internal to the inverter.

Nov 26, 2013 | Inverter KEB COMBIVERT F5

1 Answer

Oc error please help


What software are you using

Did you download the bin and language files

What cable/operator are you using

Oct 23, 2013 | Inverter KEB COMBIVERT F5

2 Answers

Keb inverter f5 error e.pu


General powericon1.png stage failure.

Most likely will need to replace the power stage or inverter.

Oct 03, 2013 | Inverter KEB COMBIVERT F5

1 Answer

I have a prblem in the F5 keb combivert it's show Error E.OC & E.puci & E.Puch could you please advice us with the proper solution thanks


E.puci During the initialization the power circuit could not be recognized as invalid.
E.puch power unit changed
power unit identification was changed, with a avalid power circuit this error can be reset by writting to SY.3. If the value displayed in SY.3 is written, only the power-cricuit dependent parameters are reinitialized. if any other value is written, then the default set is loaded . On some systems after writing SY.3 a power-On -Reset is necessary........
E.OC Overcurrent

Apr 11, 2010 | Inverter KEB COMBIVERT F5

4 Answers

F5 keb inverter problem


i have a prblem in the F5 keb combivert it's show Error
E.OC & E.puci & E.Puch could you please advice us with the proper solution
thanks

Mar 10, 2010 | Inverter KEB COMBIVERT F5

Not finding what you are looking for?
Electronics - Others Logo

Related Topics:

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top Electronics - Others Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Brad Brown

Level 3 Expert

18121 Answers

Tom Chichester

Level 3 Expert

54841 Answers

Are you an Electronics - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...