Question about Ted Baker Watches
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
I would recommend you to go to a Juwelry, or a watchmaker and let him put the plate back on it. They might do it for free, or it will cost you 3-5 euros/dollars, nothing much;)
Posted on Jun 26, 2009
You have to pull stem out of watch movement completely and then remove watch glass. Sovereign watch cases are monoblock, so, the only way to get into it is to remove the glass. Rate me, plz.
Posted on Feb 10, 2010
Testimonial: "thanks, the watch seems to be made to look like the back is separate, does the stem just pull out. it only seems to come out about 3mm.thanks"
Welcome to Fixya,
Hi hope this steps will helped you in changing the battery but I just want you to remind that you have to be careful in changing the battery because it might affect the other part.
1- remove the crown by pulling away from the watch, use your thumb and index fingernail and pull , it will come out
2- remove all 5 gold bezel screws
3 - be careful,, the bezel/crystal will pry off easy
4 - be careful and remove the entire face/hands/watch guts all in one easy step,, or just turn the watch over and it will fall out
5 - small screwdriver and remove/replace battery
6 - reinstall watch guts/bezel and gold screws
7 - push crown back into watch
Thank you for using Fixya.
Posted on Feb 22, 2011
SOURCE: How do I remove the
After removing all screws you have to use fine pointed tweezers and pry up watch case back using them. Insert between case and case back and pry up using lever action.
Posted on Apr 04, 2011
If it is indeed a screw type back it will have indentions ON the back (6 to 8). A special tool is required to remove the back without damage to the watch back. Any reputable jewelry store should be able to remove the back. If there are no indentions then it should be a pop back. Some watches do not have a slot to slide a pry tool under the back. You have to use a sharp knife..taking appropriate safety precautions.
Posted on Jul 04, 2016
Tips for a great answer:
Aug 04, 2018 | Ted Baker Watches
Feb 10, 2018 | Armitron Watches
Oct 14, 2016 | The Watches
Dec 21, 2015 | DG Watches
Feb 14, 2015 | Bulova Watch
Nov 16, 2011 | Watches
Aug 22, 2010 | DKNY Modern Edge Lady Watch # NY3901
Jul 31, 2010 | Watches
Aug 11, 2009 | Geneve 14K Gold Ladies Diamond Mesh Watch
44 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: