My GE Profile refrigerator is reading 555/666/777/888/999 after a black out now what?

SOURCE: TFX24PRXBWW GE Profile Refrigerator - energy use?

I dont know how to locate these specs for you, modern refrigerators are much more efficient for a couple of reasons. Most new units have a Computer that controls the defrost cycle whereas older units have timers that defrost every 8 hours of on comp run time regardless of whether it needs defrosting. The new ADC (adaptive defrost control) can better monitor the frost on the coils to defrost less (in the defrost cycle it consumes 5x as many watts as when its cooling. Also most new refrigs, especially new GE units have much more efficient fan motors now also, however they too are computer controlled and when they fail they are expensive. Also the very high end new Counter depth models (in the $2500+ range) have a new variable speed compressor. This gives the compressor the ability to run at a low, med, and high speed, reducing even more the watts that will be drawn in normal operation when the fan motors are on low and the compressor too. If you have any other questions let me know ill be glad to advise.

P.S. Buy an extended warranty with any new appliance you purchase! Trust me!

SOURCE: GE profile side by side refrigerator door won't close

if you took out the door for the refrigerator to put in your house thats were your problem or gasket have to change

SOURCE: where is the thermostat on a GE profile refrigerator Side-by-Side

There is no thermostat ( cold control ) on your model refrigerator . It works off thermistors ( 3 in the refrig section and 2 in the freezer section ) . These thermistors , operate by the coldness which in turn , less resistance to the main control board the colder or warmer it will provide .

SOURCE: GE Profile Side-by-Side Refrigerator gets to too cold

turn the temp setting up to40 then check in a couple of hrs

Charles T Nevin

• 4070 Answers
• Posted on Jan 20, 2010

SOURCE: ge profile refrigerator door stop isn't working

Did it ever work or for some reason you never noticed it before? I've had to swap the door stops to get the door to stop. They can usually be swapped around according to what's needed in different situations.