I just bought a replacement chain saw blade for my Remington 14'' Limb & Trim. It is an Oregon brand blade which says it is for 14'' Remington among others. But it is a bit too long for what I have. My chain saw does not have a model number on it so I can't match it to the info on the back of the chain saw blade packaging. What is the model number for the Limb & Trim so I can go back and get a suitable replacement. Thanks.

REMINGTON RM1415A Manuals

A chain saw blade requires sharpening often. It can be in as little as 20 minutes if your cutting a very hard wood. Even less if you happen to allow the blade to be used in dirt.
Here is a video to help you use a "file guide" to sharpen your blade.




^^^-- note the videos on the right side of the video that is playing.

This is the most commonly available file guide:
Oregon Scientific Oregon 7/32" Chain Saw File Guide with File #25892

http://www.google.com/search?hl=en&safe=off&rls=com.microsoft%3Aen-ph&biw=1003&bih=587&tbm=shop&q=Oregon+25892&btnG=Search&aq=f&aqi=&aql=&oq=

Thanks for choosing FixYa,
Kelly

(Another video below)

Hi, I'm assuming you mean the oil for the chain. If so any brand of bar and chain oil is fine. Hope this helps, regards Phil.

jmccabe2465-

The reservoir is for bar chain oil, which all chain saws require to allow the chain to operate smoothly and reduce heat build-up from friction.

Hope this helps.

Regards,

DIYpro

Good news Victor;
Both a bar and 3 different chains are available through an Oregon dealer. The green chain (hover the cursor over the color and there is an explanation) is most likely what your saw came fitted with but all will work, the choice is yours.
Oregon Bar & Chain Selector
http://www.oregonchain.com/pro/lookups/selguide.aspx?BusId=OCS&SellReg=USA&LangId=ENG
I input "Remington; M15014AS; 14"; All; All; All".

If you have more questions or need additional help please reply below and I will get back to you. HTH & Good Luck.
Lou
Thank You for using FixYa.

There is a very in depth explanation in this Remington OM.
http://shoppingcart.msservicecompany.com/msservice_net/product_files/113005-01D/113005-01D_OM.pdf

If you have more questions or need additional help please reply below and I will get back to you. Good Luck. HTH
Lou
Thank You for using FixYa.

I input "Remington; EL-1; 14"; All; All; All" here:
Oregon Bar & Chain Selector
http://www.oregonchain.com/pro/lookups/selguide.aspx?BusId=OCS&SellReg=USA&LangId=ENG
It returned "91VG050G, 91VX050G or 91VXL050G". Please read the triangular warning placards. The original chain is most likely green.

Column 4 says a 14" chain has 50 drive links (the part in the bar groove". Please count them, if you get a different number try a different length bar. The Oregon part number can be ordered on line or if given to a local merchant fabricated in their facility.

If you have more questions or need additional help please reply below and I will get back to you. Thank you for using FixYa and Good Luck. HTH
Lou

The honest answer to will any 14" chain fit is no! It is "YES" if it has 50 drive links, a 3/8 pitch, and a gauge of 0.050 will; provided you are using the original bar or a suitable substitute. Manufacturers almost never tell you these numbers. They want you to purchase replacements from them. Any merchant, that sells chain, given (50, 3/8, 0.050) this information can fabricate a replacement chain and unless you tell them differently it will most likely be a green chain. A local merchant will save shipping and handling fees. I enjoyed this exercise in painting with text. I hope you have a better understanding of your question. Thank You.

If you go here:
Oregon Bar & Chain Selector
http://www.oregonchain.com/pro/lookups/selguide.aspx?BusId=OCS&SellReg=USA&LangId=ENG
Input "Remington; LNT-2; 14"; All; All; All"
It tells you there are 50 drive links (the important part of length, ±1 drive link may still be 14” but will not fit); it has a pitch of 3/8 (there are other pitches available); it has a gauge of 0.050 (0.043 & 0.058 also common). If you read the Triangular information tags you will see different chains have more or less chance of kickback. I will not purchase anything with a green tag but have been using chainsaws since 1980 and wear full PPE. I hope this clarifies this part of your question.

Your OM
http://shoppingcart.msservicecompany.com/msservice_net/product_files/RPS96/RPS96_OM.pdf

A much better Remington explanation of chain installation.
http://shoppingcart.msservicecompany.com/msservice_net/product_files/113005-01D/113005-01D_OM.pdf

My explanation/example (gas but similar). The repair is the same; burrs are often created when the chain comes off at speed.
http://www.fixya.com/support/r4146814-chainsaw_chain_installation

If you have more questions or need additional help please reply below and I will get back to you. Thank you for using FixYa and Good Luck. HTH
Lou

Here is a link to the owner's manual you requested... http://12.153.20.74/manuals/107990-01G.pdf. I hope this helps you...

According to the manufacturer, "Use SAE 30 motor oil for best results. (For temperatures below 30° F, use SAE 10. For temperatures above 75° F, use SAE 40.) DO NOT use Bar & Chain oil." I will need the actual model number of your saw (it should be loacted on the saw it's self) to see if I can find the manual for you. I hope this helps so far...