SOURCE: programing for uniden bearcat scanner bc 144xl
danval, I looked up a pic of your scanner and it is pretty straightforward. If it is the 16 channel I was looking at, here is the step by step programming.
1- Push manual button to go to the channel you want to start programming.
2- Enter the freq number in.
3- Push the E button to enter it in the memory.
4- To review what you programmed, push the Review button.
5- Use manual button to step to next channel and start over from #2
That should get you started with the scanning hobby.
The scanner has a Priority button that when activated will stop scanning and go immediatly to the priority channel if someone keys their mic.
If you need freq's (or more of) for your area, go here and click on your state and county and it'll give you a complete listing.
http://www.radioreference.com/apps/db/
Hope this helps you out, let us know,, Mechanic
SOURCE: how do I program an Uniden BC-60XLT-1 scanner?
you need a USB to scanner interface and a program like w95.exe to ytransfer freq uencies to the channels. It;s a lot easier this way than laboriiously entering 1 at a time.
type w95.exe into berowser and download It's free but the transfer item cord is available from some ebay sellers Serial / USB transfer cable for bc60xlt
SOURCE: I have a Uniden Bearcat
You can download and print your scanner's operating instructions, at no cost, here:
http://www.uniden.com/pdf/BC60XLT-1om.pdf
For a comprehensive database of active frequencies in your area, and a lot of other useful scanning information, visit:
www.RadioReference.com
Please give us a shout if you need further assistance with your scanner.
Bill B
282 views
Usually answered in minutes!
×