Adjust rear hand brake on Mongoose 20 inch bicycle

Hey, Local bike shop determined that both wheels were defective. I took the junk back to Walmart and got a refund... PROBLEM SOLVED!!

Check out https://gearly.org/ for more info.

Thanks.

undo the lock nut that is on the cable holder on the brake. turn the case out to adjust the brake lock up nut when done.

The web is rich in resources for 'how to' do just about anything on a bicycle.

"adjust rear brake on bicycle"

One resource...

http://www.parktool.com/blog/repair-help/linear-pull-brake-service-v-brake-type

Search the web for 'how to' do just about anything on a bicycle.

"adjust front brake on bicycle"

http://www.parktool.com/blog/repair-help/categories/brake-service-and-repair

Web search "install brakes on bicycle"

Look here http://www.parktool.com/blog/repair-help/categories/brake-service-and-repair

Please avail yourself of a search engine for advice on this.

"adjust bmx front brakes"

http://www.bikewebsite.com/bicycle-bra.htm

This should help you.

Yes,as the cable is tighten (brakes applied) the metal slides alongthe cable. hope this helps

Take it to a bike shop, you are dealing with a trick bike. You do not want to have the brakes fail from a bad adjustment, unless you have the right tools and know how, because you are having to deal with the spacing on the detangler and it takes skill to do it right, do not do it yourself. Someone can get hurt in a diy.

undew the screew at the back of the breakes and turn them round slightly so the wheel in midlde then tighten back up should stay in midle then just not put on straight thats all mate