The power button is stuck in a sensitive position, I need to know how to open the panrl to get to it to replace.

First you need to get the button out. But if it is defect (I think it is) that won't help. Did you try to find out what is keeping the button in the depressed position? is it possible there is some dirt around the knob? Something you can remove?

I don't think it is worth bringing it to a service center.If they need one hour to repair it will cost twice a new camera of that class.

So when you can't get the know out, I think you should start saving up for a new camera.

1. Please check the warranty of your tablet and bring it to the nearest service center if possible because it need an expert in changing parts specially ultra tin tablet like yours because it is very sensitive

Does the button move at all? What model LCD is it? Most of the time if the monitor does not power up it is the power supply inside the monitor not the button sticking. The power supply can be repaired if that is the problem. Please let me about the movement on the power button and I can help you get back going with your monitor.

Buddy
Corporate Computer

I have a solution posted on replacing the button in another Question but as far as your question; If you still have the button you can pop it back in (push in and hold tight) and move it to the position to turn it on. Once it's on you don't have to hold it in to keep the camera on. Only switching it to the off position will turn it off. Let me know if you lost the button and I can give you a work around for that (even if you still have the button and are jamming it in there but it's not working my workaround could help).

In Some Cases The Button May Be Stuck In Causeing It To Keep Pushing It Open In Other Cases The Arm May Just Be Stuck To Extending The Tray Out. I Recommend Seeking A Computer Technician If You Do Not Know Anything About Computer Componants

Remove back panrl. Remove drive belt, remove 2 10mm motor bolts. Turn machine upside down. Remove bottom cover. Disconnect power lead to motor, disconnect earth lead, gently tap motor out with mallet. Brush mountings then accessible, remove and replace brushes.

Go here for an instrucional video on opening the cases on DELL monitors.

http://www.lcdrepair.us/Installation.html

A temporary fix to power up is to press the menu and power button at the same time. When the lens is extended and it beeps, on my camera , the lens is *stuck* Give it a gentle tug , then try the power button again

This head unit comes with a security screw that can be installed to secure the faceplate for retail display. If it was purchased as a demo model, the screw may be in place. To check, the deck has to be dismounted from the vehicle. The screw location will be in the side of the chassis, near the faceplate on the same side as the release button. Removing the screw will allow the faceplate to come off.